A Uniform Cooling of Alloys
نویسندگان
چکیده
A phase separation process model formed by the Cahn-Hilliard equation and the heat equation is considered. The mobility coefficient in the Cahn-Hilliard equation is assumed to be an increasing function of the temperature. This property is of importance at the latest stage of the cooling process. The existence and uniqueness of a weak solution is proved, and a uniform cooling problem is studied. Obtained results can be used to control the cooling process and to create alloys with a uniform structure.
منابع مشابه
The Microstructure Evolution of a Fe3Al Alloy during the LENS Process
A Fe₃Al intermetallic alloy has been successfully prepared by the laser-engineered net shaping (LENS) process. The applied process parameters were selected to provide various cooling rates during the solidification of the laser-melted material. The macro- and microstructure and the micro- and macrotexture of Fe₃Al samples were investigated. The influence of the cooling rate on grain morphology ...
متن کاملAbridged Metallurgy of Ductile Alloy Superconductors
The most widely used superconducting materials are based on Nb-Ti alloys with Ti contents ranging from 46-50 weight % Ti. These alloys of Nb and Ti have both high strength and ductility and can be processed to achieve high critical current densities that make them ideal candidates for magnet and applications. Nb-Ti based superconductors are commercially produced in long uniform lengths and cost...
متن کاملشببیه سازی تاثیر سرعت انجماد بر ریز ساختار آلیاژهای ریختگی آلومینیوم با استفاده از مدل شبکه عصبی مصنوعی
In cast aluminum and its alloys, the microstructure varies under different solidification conditions, causing variations in their mechanical properties. These materials are basically produced in sand and metallic molds or through die casting, each of which is associated with a unique solidification regime with significantly different cooling rates so that the resulting microstructure strongly d...
متن کاملRapid prototyping based on variable polarity gas tungsten arc welding for a 5356 aluminium alloy
This paper presents a new deposition process for directly building cylindrical parts of the 5356 aluminium alloy with variable polarity gas tungsten arc welding (VPGTAW). The relationship between the geometric sizes of the deposited layer and the welding parameters is investigated. A machine vision sensor is used to monitor and control the arc length that is a key welding parameter in the achie...
متن کاملTRANSFORMATION BEHAVIOR OF NiTi SHAPE MEMORY ALLOYS TREATED BY THERMOMECHANICAL PROCESSING USING DSC
Abstract: In the present study the effect of thermomechanical treatment (cold work and annealing) on the transformation behavior of NiTi shape memory alloys was studied. Differential scanning calorimetry was used to determine transformation temperature and its relation to precipitates and defects. Three alloys including Ti-50.3at.% Ni, Ti-50.5at.% Ni (reclamated orthodontic wires) and 50.6at...
متن کامل