Ultraviolet-ozone-treated PEDOT:PSS as anode buffer layer for organic solar cells
نویسندگان
چکیده
Ultraviolet-ozone-treated poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS)was used as the anode buffer layer in copper phthalocyanine (CuPc)/fullerene-based solar cells. The power conversion efficiency of the cells with appropriated UV-ozone treatment was found to increase about 20% compared to the reference cell. The improved performance is attributed to the increased work function of the PEDOT:PSS layer, which improves the contact condition between PEDOT:PSS and CuPc, hence increasing the extraction efficiency of the photogenerated holes and decreasing the recombination probability of holes and electrons in the active organic layers.
منابع مشابه
Enhanced performance of polymer solar cells by dipole-assisted hole extraction
Polymer solar cells (PSCs) with different anode buffer layers were fabricated to investigate dipoleassisted hole extraction on the performance improvement of PSCs. The power conversion efficiency (PCE) of PSCs was increased from 4.77% to 6.18% with 29.6% improvement due to the increased short circuit current density (Jsc) from 12.00 to 15.65 mA/cm 2 induced by the oriented LiF dipole-assisted h...
متن کاملConsequences of anode interfacial layer deletion. HCl-treated ITO in P3HT:PCBM-based bulk-heterojunction organic photovoltaic devices.
In studies to simplify the fabrication of bulk-heterojunction organic photovoltaic (OPV) devices, it was found that when glass/tin-doped indium oxide (ITO) substrates are treated with dilute aqueous HCl solutions, followed by UV ozone (UVO), and then used to fabricate devices of the structure glass/ITO/P3HT:PCBM/LiF/Al, device performance is greatly enhanced. Light-to-power conversion efficienc...
متن کاملFunctional solid additive modified PEDOT:PSS as an anode buffer layer for enhanced photovoltaic performance and stability in polymer solar cells
Poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) is most commonly used as an anode buffer layer in bulk-heterojunction (BHJ) polymer solar cells (PSCs). However, its hygroscopic and acidic nature contributes to the insufficient electrical conductivity, air stability and restricted photovoltaic (PV) performance for the fabricated PSCs. In this study, a new multifunctional add...
متن کاملPolymer Solar Cells with Polymer/Carbon Nanotube Composite Hole- Collecting Buffer Layers
We report the performance of polythiophene/fullerene solar cells with a hole-collecting buffer layer that was made using composite films of functionalized multi-walled carbon nanotube (f-MWCNT) and poly(3,4ethylenedioxythiphene):poly(styrenesulfonate) (PEDOT:PSS). The MWCNT was functionalized with carboxyl groups to bestow solubility in a weak base solvent for mixing with PEDOT:PSS. Results sho...
متن کاملFully spray-coated ITO-free organic solar cells for low-cost power generation
We report on cost-effective ITO-free organic solar cells (OSCs) fabricated by a spray deposition method. All solution-processable layers of solar cells—a highly conductive poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) layer and a photoactive layer based on poly(3-hexylthiophene) (P3HT) and 1-(3-methoxycarbonyl)-propyl-1-phenyl-(6,6)C61 (PCBM)—were spray-coated. PEDOT:PSS a...
متن کامل