Advances in combined electro-optical palatography
نویسندگان
چکیده
This paper describes the development of a device that combines the electropalatographic measurement of tongue-palate contact with optical distance sensing to measure the mid-sagittal contour of the tongue and the position of the lips. The device consists of a thin acrylic pseudopalate that contains both contact sensors and optical reflective sensors. Application areas are, for example, experimental phonetics, speech therapy, and silent speech interfaces. With regard to the latter, the prototype of the system was applied to the recognition of vowels from the sensor signals. It was shown that a classifier using the combined input data from both the contact sensors and the optical sensors had a higher recognition rate than classifiers based on only one type of sensory input.
منابع مشابه
Evaluation of Combined Electro Cutter with Cold Knife in the Intractable Anterior Urethral Stricture Urethrotomy
Background: Sachse cold knife is conventionally used for optical internal urethrotomy to manage urethral strictures. In this procedure, the complications and recurrence rates are relatively high. We suggest combined electro cutter and cold knife as a success alternative in the management of intractable anterior urethral strictures. Methods: In this prospective...
متن کاملA New Optical Implementation of Reversible Fulladder Using Optoelectronics Devices
This study introduces a reversible optical fulladder. Also optical NOT and NOR gates are implemented through Electro-Absorption-Modulator / Photo Detector (EAM/PD) pairs, were utilized for fulfilling reversible R gate. Then, reversible fulladder was designed based on the proposed reversible optical R gate. The operation of the suggested fulladder was simulated using Optispice and it was fou...
متن کاملProspects of Epg and Opg Sensor Fusion in Pursuit of a 3d Real-time Representation of the Oral Cavity
After giving a brief review of the underlying technologies electro-palatography and optical palatography, this paper presents the prototype of a device that combines electrical and optical palatographic measurements to reconstruct the tongue surface during articulation in real-time. The prototype consists of a mouth piece (pseudo-palate) and a control board, and improves on a previous design by...
متن کاملA New Optical Implementation of Reversible Fulladder Using Optoelectronics Devices
This study introduces a reversible optical fulladder. Also optical NOT and NOR gates are implemented through Electro-Absorption-Modulator / Photo Detector (EAM/PD) pairs, were utilized for fulfilling reversible R gate. Then, reversible fulladder was designed based on the proposed reversible optical R gate. The operation of the suggested fulladder was simulated using Optispice and it was fou...
متن کاملExperimental investigation, modeling, and optimization of combined electro-(fenton/coagulation/flotation) process: design of experiments and artificial intelligence systems
In this study, a combined electro-(Fenton/coagulation/flotation) (EF/EC/El) process was studied via degradation of Disperse Orange 25 (DO25) organic dye as a case study. Influences of seven operational parameters on the dye removal efficiency (DR%) were measured: initial pH of the solution (pH0), applied voltage between the anode and cathode (V), initial ferrous ion concentration (CFe), initial...
متن کامل