Bridged Delamination Cracks in Curved Beams and Mixed-mode Bending Specimens
نویسندگان
چکیده
Theoretical approaches based on bridged-crack models and plate/beam theory have proved to be effective in the modeling of Mode I and Mode II delaminations in composite laminates reinforced through the thickness. This paper deals with some aspects of the modeling of Mixed Mode delaminations. Two typical mixed mode problems are considered: the curved beam in bending (C specimen) and the Mixed-Mode Bending specimen (MMB) reinforced through the thickness.
منابع مشابه
Modal Characteristics of Composite Beams with Single Delamination- A Simple Analytical Technique
In the present research, the effects of delamination size and location on vibration characteristics of laminated composite beams are investigated both analytically and numerically. In the analytical method, the delaminated beam is modeled as four interconnected Euler–Bernoulli beams and the constrained and free mode models are both simulated. The differential stretching and the bending-extensio...
متن کاملThe Use of Doublers in Delamination Toughness Testing
In this paper, the data reduction equations for common delamination toughness tests are rederived for use with specimens which have bonded doublers. The common toughness tests considered here are the double cantilever beam (DCB) for mode I toughness; the end notch flexure (3ENF) and 4 point ENF (4ENF) for mode II toughness; and the mixed mode bending (MMB) test for testing under combined mode I...
متن کاملPropagation of Matrix Cracking and Induced Delaminatin in Cross-Ply Composite Beams Subjected to Bending Loads
Due to the mismatch of mechanical properties in composite laminates, propagation of delami-nation is considered as a severe damage mechanism in beams with various lay-up configurations. Delamination can be generated due to matrix cracking propagation or it can also be initiated due to the manufacturing process before using composite beams. Using a micromechanics model, this study is aimed to in...
متن کاملThree Dimensional Finite Element Analysis of Multidirectional Composite DCB, SLB and ENF Specimens
Results are presented from a numerical investigation of the effect of stacking sequence on energy release rate distribution in laminated carbon fibre reinforced epoxy double cantilever beam, single leg bending and end-notched flexure test specimens. The deformation behaviour of the specimens has been computed by three-dimensional nonlinear finite element analyses using a recently developed laye...
متن کاملAnalysis of post-buckling and delamination in laminated composite St. Venant–Kirchhoff beams using CZM and layer-wise TSNDT
A layer-wise third order shear and normal deformable plate/shell theory (TSNDT) incorporating a cohesive zone model (CZM) is used to study the initiation and growth of delamination in straight and curved laminated beams. Upon satisfaction of the delamination criteria at a point on the interface between two layers, displacements there of two abutting points on the interface between the two layer...
متن کامل