A Two-Stage Ceramic Tile Grout Sealing Process Using A High Power Diode Laser Part I: Grout Development And Materials Characteristics

A Two-Stage Ceramic Tile Grout Sealing Process Using A High Power Diode Laser Part II: Mechanical, Chemical And Physical Properties

Properties of Low-ph Cement Grout as a Sealing Material for the Geological Disposal of Radioactive Waste

The OECD NEA (Nuclear Energy Agency) anticipates that by 2050 the amount of nuclear-generated electricity worldwide will increase by a minimum of 1.6 times and a maximum of 3.9 times its 2008 value of 372 GWe [1]. At the same time, the amount of radioactive waste that will be produced is expected to increase substantially. High-level radioactive waste is usually derived from the burning of uran...

Numerical modeling of the effects of joint hydraulic aperture, orientation and spacing on rock grouting using UDEC: A case study of Bakhtiary Dam of Iran

This study aims at presenting a numerical model for predicting grout flow and penetration length into the jointed rock mass using Universal Distinct Element Code (UDEC). The numerical model is validated using practical data and analytical method for grouting process. Input data for the modeling, including geomechanical parameters along with grout properties, were obtained from a case study. The...

Laboratory Testing of Silica Sol Grout in Coal Measure Mudstones

The effectiveness of silica sol grout on mudstones is reported in this paper. Using X-ray diffraction (XRD), the study investigates how the silica sol grout modifies mudstone mineralogy. Micropore sizes and mechanical properties of the mudstone before and after grouting with four different materials were determined with a surface area/porosity analyser and by uniaxial compression. Tests show th...

Bio-grout based on microbially induced sand solidification by means of asparaginase activity

Bio-grout, a new ground improvement method, has been recently developed to improve the mechanical properties, decrease the permeability of porous materials, reinforce or repair cementitious materials and modify the properties of soil or sand. Bio-grout production depends on microbially induced calcite precipitation (MICP), which is driven mainly by an enzyme, urease. However, urease-based MICP ...