Researching on YH100 Numerical Control Servo Press Hydraulic Control System and Control Algorithm
نویسندگان
چکیده
In order to study the numerical control (NC) servo press hydraulic control system and its control algorithm. The numerical control servo press performance and control principle of hydraulic control system are analyzed. According to the flow equation of the hydraulic control valve, hydraulic cylinder flow continuity equation and the force balance equation of the hydraulic cylinder with load press, the mathematical model of hydraulic control system is established. And the servo press hydraulic system transfer function is deduced. Introducing the suitable immune particle swarm control algorithm for servo press hydraulic system, and the control system block diagram is established. Immune algorithm is used to optimize new control parameters of the system and adopt the new optimization results to optimize the system simulation. The simulation result shows that the hydraulic system’s transition time controlled by the immune particle swarm algorithm is shorter than traditional ones, and the control performance is obviously improved. Finally it can be concluded that immune particle swarm PID control have these characteristics such as quickness, stability and accuracy. Applying this principle into application, the obtained YH100 numerical control servo press hydraulic control system meets the requirement. Copyright © 2014 IFSA Publishing, S. L.
منابع مشابه
Velocity Control of Electro Hydraulic Servo System by Tracking Method
This paper proposes an efficient Tracking method for velocity control of an electro-hydraulic servo system (EHSS) in the presence of flow nonlinearities and internal friction. The tracking method controller is a kind of feedback error learning structure. In the proposed method, the Feedback Error Learning (FEL) algorithm is used to control the velocity. There is no need to compute the system ja...
متن کاملVelocity Control of Electro Hydraulic Servo System by using a Feedback Error Learning Method
In this paper, a new control method based on FEL electro hydraulic servo control withnonlinear flux and internal friction, has been presented. The new approach based oncontrollers combined by a classic PD controller and a fuzzy controller is smart. This newtechnique has a good ability to control the performance and stability. Simulations have beencarried out in Matlab environment and the result...
متن کاملModelling and control of a hydraulic servo system
This thesis examines the modelling and control of a hydraulic servo system. Both a theoratical and a practical approach are discussed. The used set-up consists of an one DOF hydraulic system with an electronically controlled servo valve. A nonlinear parametric model of the system, several fitted linear black box models as well as a LPV model combining these fits are determined. The models are v...
متن کاملMarcin Stefan Cwiklinski Impedance Control of a Hydraulic Servomechanism
A position-based impedance controller is proposed and demonstrated on an existing hydraulic press with a two-way vertically mounted hydraulic cylinder driven by a servo-solenoid valve. A proportional-integral-derivative (PID) controller and a Fuzzy Logic Controller (FLC) are primarily developed to meet the accurate positioning requirements of the impedance control formulation. The impedance fil...
متن کاملAn Improved Digital PID Algorithm for Angle Position Electric-hydraulic Servo System
PID control algorithm is widely used in servo control system. Because of the non-symmetrical structure of the hydraulic cylinders in the angle position electric-hydraulic servo system of plant converter, the conventional PID control has low control precision and bad flexibility. To solve the problem, an improved digital PID control algorithm with variable sampling periods is proposed. Based on ...
متن کامل