In-Chamber Analysis of Pollutants Formation in Diesel Combustion by Spectral Measurements and Numerical Simulations
نویسندگان
چکیده
Experimental difficulties in following the soot formation and oxidation processes in the environment of diesel engines are recognised in the high values of the in-chamber temperature and pressure and the presence of extremely reactive intermediate species. At present, optical techniques have overwhelmed lacks typical of both local in-cylinder and totalcylinder samplings, which allow a high temporal resolution but give no insight into the instantaneous spatial distribution of the soot concentration [1-3].
منابع مشابه
Numerical study of the effect of fuel injection timing on the ignition delay, performance parameters and exhaust emission of gas/dual fuel diesel engine using Computational Fluid Dynamics
Today, due to the various usage of compression ignition engines in urban transportation, as well as the need to reduce exhaust emissions and control fuel consumption, the use of alternative fuels has become common in diesel engines. Gaseous fuel is one of the most common alternative fuels that can be used in diesel engines. The utilization of alternative fuels in compression ignition engines re...
متن کاملPrediction of Major Pollutants Emission in Direct-Injection Dual-Fuel Diesel And Natural-Gas Engines
The dual-fuel diesel engine (D.F.D.E) is a conventional diesel engine in which much of the energy released, hence power, comes from the combustion of gaseous fuel such as natural gas. The exhaust emission characteristics of the D.F.D.E needs further refinements, particularly in terms of reduction of Unburnt Hydrocarbons (U7HC) and Carbon Monoxide (CO) emission, because the concentration of thes...
متن کاملThree Dimensional Modeling of Combustion Process and Emissions Formationin Pre and Main Chambers of an Idirect Injection Diesel Enginge
The combustion processes and emission formation in pre and main chambers of a Lister 8.1 IDI diesel are simulated with the Computational Fluid Dynamics (CFD) code. The model includes spray atomization, mixture formation and distribution and subsequently the combustion processes and emissions formation modeling are carried out with considering of flow configurations in two chambers. A part load ...
متن کاملA Computational Study of the Effects of Combustion Chamber Geometries on Combustion Process and Emission in a DI Diesel Engine
A computational study aiming to investigate the effect of combustion chamber geometry on combustion process and emission has been carried out in a direct injection diesel engine. The combustion process and emission of three different combustion chamber geometries were considered, and combustion process behaviors such as variation of mean pressure, velocity, heat release rate, emission productio...
متن کاملPDF-based simulations of turbulent spray combustion in a constant-volume chamber under diesel-engine-like conditions
Transported probability density function (PDF) methods are used to account for turbulent fluctuations in composition and temperature in simulations of liquid fuel injection (n-heptane), vaporization, mixing, autoignition, combustion and soot formation for a constant-volume combustion chamber. Both stochastic Lagrangian particle and stochastic Eulerian field methods are used to solve the modeled...
متن کامل