An 8-Channel Wavelength MMI Demultiplexer in Slot Waveguide Structures

نویسندگان

  • Bar Baruch Ben Zaken
  • Tal Zanzury
  • Dror Malka
چکیده

We propose a novel 8-channel wavelength multimode interference (MMI) demultiplexer in slot waveguide structures that operate at 1530 nm, 1535 nm, 1540 nm, 1545 nm, 1550 nm, 1555 nm, 1560 nm, and 1565 nm. Gallium nitride (GaN) surrounded by silicon (Si) was found to be a suitable material for the slot-waveguide structures. The proposed device was designed by seven 1 × 2 MMI couplers, fourteen S-bands, and one input taper. Numerical investigations were carried out on the geometrical parameters using a full vectorial-beam propagation method (FV-BPM). Simulation results show that the proposed device can transmit 8-channel that works in the whole C-band (1530-1565 nm) with low crosstalk (-19.97--13.77 dB) and bandwidth (1.8-3.6 nm). Thus, the device can be very useful in optical networking systems that work on dense wavelength division multiplexing (DWDM) technology.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

A Thermally Tunable 1 × 4 Channel Wavelength Demultiplexer Designed on a Low-Loss Si3N4 Waveguide Platform

A thermally tunable 1 × 4 channel optical demultiplexer was designed using an ultra low-loss Si3N4 (propagation loss ~3.1 dB/m) waveguide. The demultiplexer has three 2 × 2 Mach-Zehnder interferometers (MZI), where each of the MZI contains two 2 × 2 general interference based multimode interference (MMI) couplers. The MMI couplers exhibit −3.3 dB to −3.7 dB power division ratios over a 50 nm wa...

متن کامل

Improved Plasmonic Demultiplexer Based on Tapered and Rectangular Slot MIM Waveguide

In this paper, we have proposed two novel plasmonic demultiplexing structures based on metal-insulator-metal surfaces which, beside their compact size, have a very good transmission spectrum. The impact of the key internal parameters on the transmission spectrum is numerically analyzed by using the twodimensional (2D) finite difference time domain (FDTD) method. The proposed structures could be...

متن کامل

Tunable arrayed waveguide Demultiplexer on X- cut LiNbO3

The design of demultiplexers based on array waveguides is well known [1-5]. A new design based on the concept of variable waveguide depth was recently reported [6]. Since, the fabrication of channel waveguides on glass, silica or lithium niobate is mostly controlled by the lithography pattern and the subsequent fabrication process, it is difficult to implement the variable depth concept on thes...

متن کامل

Novel Four-Channel All Optical Demultiplexer Based on Square PhCRR for Using WDM Applications

Ring resonators have always been referred to as a highly flexible structurefor designing optical devices. In this study, we have designed and simulation a fourchannel optical demultiplexer using square photonic crystal ring resonator. The squarelattice constant for this purpose structure is used. The purposed structure has an averagecrosstalk, transmission coefficient, q...

متن کامل

Comparative Analysis of AWG Demultiplexer and Chirped FBG based Demultiplexer in WDM PON Network

In Wavelength Division Multiplexing based Passive Optical Network (WDM-PON), multiple wavelength used to separate Optical Network Unit (ONU). Which actually increase the capacity of PON . WDM process can be dense and ultra-dense depending on channel spacing. In this paper we compare performance of Array Waveguide Grating Demultiplexer (AWG DEMUX) and Fiber Bragg Grating based Demultiplexer (FBG...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره 9  شماره 

صفحات  -

تاریخ انتشار 2016