Influence of implant abutment material on the color of different ceramic crown systems.

نویسندگان

  • Doğu Ömür Dede
  • Arzu Armağanci
  • Gözlem Ceylan
  • Ersan Celik
  • Soner Cankaya
  • Burak Yilmaz
چکیده

STATEMENT OF PROBLEM Ceramics are widely used for anterior restorations; however, clinical color reproduction still constitutes a challenge particularly when the ceramic crowns are used on titanium implant abutments. PURPOSE The purpose of this in vitro study was to investigate the effect of implant abutment material on the color of different ceramic material systems. MATERIAL AND METHODS Forty disks (11×1.5 mm, shade A2) were fabricated from medium-opacity (mo) and high-translucency (ht) lithium disilicate (IPS e.max) blocks, an aluminous ceramic (VITA In-Ceram Alumina), and a zirconia (Zirkonzahn) ceramic system. Disks were fabricated to represent 3 different implant abutments (zirconia, gold-palladium, and titanium) and dentin (composite resin, A2 shade) as background (11×2 mm). Disk-shaped composite resin specimens in A2 shade were fabricated to represent the cement layer. The color measurements of ceramic specimens were made on composite resin abutment materials using a spectrophotometer. CIELab color coordinates were recorded, and the color coordinates measured on composite resin background served as the control group. Color differences (ΔE00) between the control and test groups were calculated. The data were analyzed with 2-way analysis of variance (ANOVA) and compared with the Tukey HSD test (α=.05). RESULTS The ceramics system, abutment material, and their interaction were significant for ΔE00 values (P<.001). Clinically unacceptable results (ΔE00>2.25) were observed for lithium disilicate ceramics on titanium abutments (2.46-2.50). The ΔE00 values of lithium disilicate ceramics for gold-palladium and titanium abutments were significantly higher than for other groups (P<.05). CONCLUSION The color results (ΔE00>2.25) of an implant-supported lithium disilicate ceramic restoration may be clinically unacceptable if it is fabricated over a titanium abutment. Zirconia may be a more suitable abutment material for implant-supported ceramic restorations.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Influence of abutment material on the gingival color of implant-supported all-ceramic restorations: a prospective multicenter study.

PURPOSE The aim of this clinical research on implant-supported restorations is to analyze, through spectrophotometric digital technology, the influence of the abutment material on the color of the peri-implant soft tissue. MATERIAL AND METHODS Twenty patients received an endosseous dental implant in the anterior maxilla. At the time of each definitive prosthesis delivery, an all-ceramic crown...

متن کامل

تحلیل المان محدود ایمپلنت‌های دندانی در معرض بارگذاری حرارتی

  Background and Aims: Dental implants have been studied for replacement of missing teeth for many years. Productivity of implants is extremely related to the stability and resistance under applied loads and the minimum stress in jaw bone. The purpose of this study was to study numerically the 3D model of implant under thermal loads.   Materials and Methods: Bone and the ITI implant were modele...

متن کامل

Influence of Restorative Materials on Color of Implant-Supported Single Crowns in Esthetic Zone: A Spectrophotometric Evaluation

Restorations of 98 implant-supported single crowns in anterior maxillary area were divided into 5 groups: zirconia abutment, titanium abutment, and gold/gold hue abutment with zirconia coping, respectively, and titanium abutment with metal coping as well as gold/gold hue abutment with metal coping. A reflectance spectrophotometer was used to evaluate the color difference between the implant cro...

متن کامل

Treatment Plan For: Single implant crown supported by a pre-fabricated abutment

D6056 prefabricated abutment includes placement D6057 custom abutment includes placement D6058 abutment supported porcelain/ceramic crown D6059 abutment supported porcelain fused to metal crown (high noble metal) D6060 abutment supported porcelain fused to metal crown (predominantly base metal) D6061 abutment supported porcelain fused to metal crown (noble metal) D6062 abutment supported cast m...

متن کامل

The influence of veneering porcelain thickness of all-ceramic and metal ceramic crowns on failure resistance after cyclic loading.

STATEMENT OF PROBLEM In some clinical situations, the length of either a prepared tooth or an implant abutment is shorter than ideal, and the thickness of a porcelain crown must be increased. Thickness of the coping and the veneering porcelain should be considered to prevent mechanical failure of the crown. PURPOSE The purpose of this study was to investigate the influence of veneering porcel...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • The Journal of prosthetic dentistry

دوره 116 5  شماره 

صفحات  -

تاریخ انتشار 2016