Modeling the evolution of orientation distribution functions during grain growth of some Ti and Zr alloys
نویسنده
چکیده
A 2D cellular automaton model developed for the simulation of grain growth in hexagonal metals is presented here. It allows the direct use of experimental measurement as input data. Texture evolution of a titanium alloy and a zirconium alloy are simulated on the basis of simple hypothesis and compared with experimental evolution as well as the results from a 3D Monte Carlo model. Results from both models are discussed with regards to their characteristics.
منابع مشابه
An investigation on metallurgical and mechanical properties of vacuum brazed Ti-6Al-4V to 316L stainless steel using Zr-based filler metal
Both Ti-6Al-4V and 316L stainless steels are widely used as engineering alloys. Fusion welding of these two alloys is not easily possible due to their incomplete solubility in each other. Brazing is one of the best choices for joining dissimilar alloys. In this study, wettability experiments were done at 940 and 970 ºC for 5, 15 and 30 min. Also, joining of these two alloys was carried out at 9...
متن کاملCharacterization and Investigation of Grain Selection in Spiral Grain Selectors during Casting Single-Crystal Turbine Blades
Manufactured single crystal components using Ni-base super alloys are routinely used in the hot sections of aero engines and industrial gas turbines due to their outstanding high temperature strength, toughness and resistance to degradation in corrosive and oxidative environments. To control the quality of the single crystal turbine blades, particular attention has been paid to grain selection,...
متن کاملCharacterization and Investigation of Grain Selection in Spiral Grain Selectors during Casting Single-Crystal Turbine Blades
Manufactured single crystal components using Ni-base super alloys are routinely used in the hot sections of aero engines and industrial gas turbines due to their outstanding high temperature strength, toughness and resistance to degradation in corrosive and oxidative environments. To control the quality of the single crystal turbine blades, particular attention has been paid to grain selection,...
متن کاملMicrostructural evolution of body-centered cubic structure related Ti–Zr–Ni phases in non-stoichiometric Zr-based Zr–Ti–Mn–V–Ni hydride electrode alloys
Non-stoichiometric Zr-based alloys were prepared, and the corresponding electrochemical properties were characterized as hydride electrode alloys. The microstructure and chemical composition of non-stoichiometric Zr–Ti–Mn–V–Ni hydride electrode alloys were systematically investigated by x-ray Rietveld refinement, transmission electron microscopy (TEM), and energy dispersive spectroscopy under T...
متن کاملReview on ultrafined/nanostructured magnesium alloys produced through severe plastic deformation: microstructures
A review on the microstructural evolution in magnesium alloys during severe plastic deformation waspresented. The challenges deserved to achieve ultrafine/ nanostructured magnesium were discussed.The characteristics of the processed materials are influenced by three main factors, including i)difficult processing at low temperatures, ii) high temperature processing and the occurrence ofdynamic r...
متن کامل