Effect of Flow Rate of Side-Type Orifice Intake on Withdrawn Water Temperature
نویسندگان
چکیده
Side-type orifice intake is a type of selective withdrawal facility used in managing reservoirs to mitigate the negative effects of low-temperature water. Based on the temperature data of a thermal stratified reservoir in China, an experiment was conducted in flume to study the influence of intake flow rate on withdrawn water temperature with different temperature distributions. Results indicated that withdrawn water temperature changed with different flow rates. The temperature change was determined by the water temperature gradients above and below the intake, whereas the change trend of temperature depended on the difference between the water temperature gradient above and below the intake. We likewise proposed a new equation with which the withdrawn water temperature of a thermal stratified reservoir using a side-type orifice could be calculated. These findings could be directly applied to the design and operation of side-type orifice intake in thermal stratified reservoirs.
منابع مشابه
Gas Flow Metering Using the PSO Optimized Interval Type- 2 Fuzzy Neural Network
Orifice flow meter is one of the most common devices in industry which is used for measuring the gas flow. This system includes an orifice plate, temperature and pressure transmitters, and a flow computer. The flow computer is used for collecting information related to temperature, pressure, and their differences under various conditions. Also the flow computer can calculate the flow rate of ga...
متن کاملExperimental Modeling of a Long Orifice-type Restrictor of High Speed Turbine Hybrid Bearing
To overcome the space limit of orifice-type and capillary restrictors in hybrid bearings, a kind of atypical long orifice-type restrictor is proposed and its experimental model is established. Through the analysis of the structure and flow rate of orifice-type restrictor and capillary restrictor, a long orifice-type restrictor and a feasible experimental modeling method are presented by use of ...
متن کاملSimulation of flow and Hydraulic of bottom in take structure using the flow3D software
Bottom intake is an intake structure which can be considered as an alternative for regular intakes in mountain streams Water in in taking from river are very vast and complicated issues, each project has special characteristics which should be considered. Water intake from riveris generally based on Pump and gravity method. The gravity method is more useful and common because of continuity and ...
متن کاملNumerical and Experimental Analysis of the Effect of Flow Discharge Ratio on Flow Separation at 45 Degree Open End Water Intake
Flow separation at water intake is the main cause of head loss and flow discharge reduction. As a result, study of shape and size of separation is very essential when designing an optimum water intake. Water intake is normally built with a 90 degree angle to the main channel flow direction. However, the flow structure in this type of water intake consists of large separation size along with ...
متن کاملNumerical and Experimental Analysis of the Effect of Flow Discharge Ratio on Flow Separation at 45 Degree Open End Water Intake
Flow separation at water intake is the main cause of head loss and flow discharge reduction. 
As a result, study of shape and size of separation is very essential when designing an optimum water intake. Water intake is normally built with a 90 degree angle to the main channel flow direction. However, the flow structure in this type of water intake consists of large separation size along wit...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
دوره 2014 شماره
صفحات -
تاریخ انتشار 2014