A study of availability-centered preventive maintenance for multi-component systems

This paper studies preventive maintenance (PM) in simultaneously considering three actions, mechanical service, repair and replacement for a multi-components system based on availability. Mechanical service denotes the activities including lubricating, cleaning, checking and adjusting, etc. which is set to alleviate strength degradation. Repair is defined on that not only slow down the degraded velocity but also restore the degraded strength partly. Replacement is settled to recover a component to its original condition. According to the definitions, the degradation of components is analyzed from its failure mechanisms and the improvements of various actions to it in reliability were measured by using two improved factors. Following the proposed model of reliability, the mean-up and mean-down times of each component are also investigated and the replacement intervals of components are determined based on availability maximization. Here, the minimum one among the intervals is chosen as the PM interval of system for programming the periodical PM policy. The selection of action for the components on every PM stage is decided by maximizing system benefit in maintenance. Repeatedly, the scheduling is progressed step by step and is terminated until the system extended life reaching to its expected life. The complete schedule provides the information, the actions adopted for the components, the availability and the total cost of system on each stage. Validly, a multi-components system is used as an example to describe the proposed algorithm. q 2003 Elsevier Ltd. All rights reserved.