Crushing of circular steel tubes filled with nanoporous- materials-functionalized liquid
نویسندگان
چکیده
The crush behaviors of steel tubes filled with nanoporous-materials-functionalized liquids are experimentally investigated under quasi-static and dynamic conditions. Results show that the nanoporous-materials-functionalized liquid can enhance the load-carrying and the energy absorption capacities of thin-walled tubes, as the buckling mode is affected. The effective buckling stress increases with the infiltration pressure, and the overall compressibility is highly dependent on the nanopore volume. A general rule of designing nanoporous-materials-functionalized liquid-filled tubes is proposed. The interaction between the tube wall and the nanoporous-materials-functionalized liquid is analyzed.
منابع مشابه
Effect of adhesive on the strengthening of aluminum foam-filled circular tubes
Studies of the crushing behavior of closed-cell, aluminum foam-filled aluminum and steel tubes have shown an interaction effect between tube wall and foam filler [1, 2, 3]. The crushing loads of foam-filled tubes are, therefore, found to be higher than the sum of the crushing loads of foam (alone) and tube (alone) mainly due to this effect. Santosa et al. [1], based on FEM results, proposed the...
متن کاملMulti-response Optimization of Grooved Circular Tubes Filled with Polyurethane Foam as Energy Absorber
The main objective of this research is to improvethe design and performance of the polyurethane foam-filled thin-walled aluminum grooved circular tubes using multi-response optimization (MRO) technique. The tubes are shaped with the inner and the outer circular grooves at different positions along the axis. For this aim, several numerical simulations using ABAQUS finite element explicit code ar...
متن کاملExperimental and Numerical Simulation Investigation on Crushing Response of Foam-Filled Conical Tubes Stiffened with Annular Rings
In this paper, crashworthiness characteristics of conical steel tubes stiffened by annular rings and rigid polyurethane foam are investigated. For this purpose, wide circumferential rings are created from the outer surface of the conical tube at some determined areas along tube length. In fact, this method divides a long conical tube into several tubes of shorter length. When this structure is ...
متن کاملEffect of the Concrete Strength on the Concrete-Steel Bond in Concrete Filled Steel Tubes
In this study, the concrete-steel bond strength of concrete filled cylindrical steel tubes has been experimentally investigated. 22 short, high strength and normal concrete filled circular steel tubes were tested. Push-out test was carried out as the common method to evaluate the bond carrying capacity. Four different concrete mixes were used in preparing the specimens. The steel tubes were w...
متن کاملCyclic Evolution of Damage and Beam-column Interaction Strength of Concrete-filled Steel Tube Beam-columns
The assessment of response of composite seismic force resisting systems requires accurate nonlinear formulations for the composite members. In this work, reporting the first phase of a NEES project, a three-dimensional distributed plasticity formulation is presented for both circular and rectangular composite concrete-filled steel tubes (CFTs) that includes new constitutive models for the concr...
متن کامل