Robust and artifact-free mounting of tissue samples for atomic force microscopy.
نویسندگان
چکیده
Immobilization of tissue-samples for atomic for microscopy (AFM) is typically done using either semi-dry tissue or by gluing the tissue sample down, both of which can introduce artifacts. Here, we describe the design of a Soft- Clamping Immobilizing Retainer of Tissue (SCIRT) for consistent and nondestructive immobilization of tissues for AFM analysis. We compare the performance of our SCIRT method with glue-immobilization for two difficult to handle tissue types: human trabecular meshwork (HTM) and rabbit cornea (RC). Our results demonstrate that the SCIRT method has several advantages, including: (i) allowing for small sample sizes, (ii) enabling continuous hydration, (iii) eliminating contact with glue or associated solvents, (iv) permitting sample recovery following measurement, and (v) ease of use. In conclusion, the SCIRT method is a simple and effective means of immobilizing soft, hydrated tissue samples consistently and without artifacts.
منابع مشابه
Atomic Force Microscopy Application in Biological Research: A Review Study
Atomic force microscopy (AFM) is a three-dimensional topographic technique with a high atomic resolution to measure surface roughness. AFM is a kind of scanning probe microscope, and its near-field technique is based on the interaction between a sharp tip and the atoms of the sample surface. There are several methods and many ways to modify the tip of the AFM to investigate surface properties, ...
متن کاملSurface Evaluation of Resin Zein Films Containing Sugar Plasticizers by Permeability and Atomic Force Microscopy Analysis
Zein is one of the best biopolymer for edible film making and sugars are natural plasticizers for biopolymers. In this research, sugars (fructose, galactose and glucose) at three levels (0.5, 0.7, 1 g/g of zein) were used as plasticizers for zein protein films and their water vapor permeability (WVP), oxygen permeability (OP) and atomic force microscopy (AFM) topography were studied. The p...
متن کاملSensitivity Analysis of Frequency Response of Atomic Force Microscopy in Liquid Environment on Cantilever's Geometrical Parameters
In this paper, the non-linear dynamic response of rectangular atomic force microscopy in tapping mode is considered. The effect of cantilever’s geometrical parameters (e.g., cantilever length, width, thickness, tip length and the angle between the cantilever and the sample's surface in liquid environment has been studied by taking into account the interaction forces. Results indicate that the r...
متن کاملHigh Resolution Image with Multi-wall Carbon Nanotube Atomic Force Microscopy Tip (RESEARCH NOTE)
In this paper, a simple and reproducible approach for attaching the multi-wall carbon nanotubes (MWNTs) to the apex of the atomic force microscope probe has been proposed. For this purpose, the dielectrophoresis method was applied due to its simple performance, cheapness and reliability. In this method, various parameters such as voltage, frequency, concentration of carbon nanotubes solution an...
متن کاملExploring mechanism of xanthate adsorption on chalcopyrite surface: An atomic force microscopy study
In this work, adsorption of the potassium amyl xanthate collector on the pure chalcopyrite surface was studied by applying atomic force microscopy (AFM). The adsorption experiments were carried out at different concentrations of the collector and at diverse pH values in the presence or absence of exterior ions. The changes occurring in the surface morphology of chalcopyrite due to the collector...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- BioTechniques
دوره 56 1 شماره
صفحات -
تاریخ انتشار 2014