Coextruded Polyethylene and Wood-Flour Composite: Effect of Shell Thickness, Wood Loading, and Core Quality

نویسندگان

  • Fei Yao
  • Qinglin Wu
چکیده

Coextruded recycled polyethylene and wood-flour composites with core–shell structure were manufactured using a pilot-scale coextrusion line. The influence of wood loadings and thickness of the shell layer and core quality on mechanical and water absorption properties of the composites were investigated. Core–shell structured profile can significantly improve flexural and impact strengths of composites especially when a relatively weak core was used. However, the coextruded profile with unreinforced shell may have a reduced modulus when a strong core was used. The shell layer also protected coextruded composites from long-term moisture uptaking, leading to improved dimensional stability compared with the corresponding un-coextruded controls. When the shell thickness was fixed, less wood loading in the shell layer did not cause obvious flexural modulus and dimension change but improved impact strength and water resistance of the coextruded composites. When wood loading in the shell layer was fixed, increased shell thickness improved impact strength but affected modulus negatively. Thickened shell layer helped reduce water uptaking but did not change dimensional stability of coextruded composites remarkably. Overall enhancement of composite strength was more pronounced for the weaker core system. Thus, the coextrusion technology can be used to achieve acceptable composite properties even with a relatively weak core system—offering an approach to use recycled, low quality plastic-fiber blends in the core layer. VC 2010 Wiley Periodicals, Inc. J Appl Polym Sci 118:

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Dynamic Mechanical Analysis of Compatibilizer Effect on the Mechanical Properties of Wood Flour-High-Density Polyethylene Composites

In this study, effect of MAPE (maleic anhydride polyethylene) as the compatibilizer on the mechanical properties of wood-flour polyethylene composites has been investigated by using Dynamic Mechanical Analysis (DMA). Composites were made at 25% and 50% by weight fiber contents and 1% and 2% compatibilizer respectively. Controls were also made at the same fiber contents without the compatibilize...

متن کامل

A novel wood flour-filled composite based on microfibrillar high-density polyethylene (HDPE)/Nylon-6 blends.

A novel wood flour (WF)-filled composite based on the microfibrillar high-density polyethylene (HDPE) and Nylon-6 co-blend, in which both in situ formed Nylon-6 microfibrils and WF acted as reinforcing elements, was successfully developed using a two-step extrusion method. At the 30wt.% WF loading level, WF-filled composite based on the microfibrillized HDPE/Nylon-6 blend exhibited higher stren...

متن کامل

Effect of Wood Flour Content on the Hardness and Water Uptake of Thermoplastic Polymer Composites

Polypropylene/wood flour composites were melting compounded in an internal mixer at 190°C and 60 rpm rotor speed and then samples were fabricated by injection molding. Effects wood flour content on the physical properties of composites was investigated. For this purpose, hardness, water absorption and thickness swelling of samples was determined at different levels of wood flour content. The re...

متن کامل

Stiffness Prediction of Beech Wood Flour Polypropylene Composite by using Proper Fiber Orientation Distribution Function

One of the most famous methods to predict the stiffness of short fiber composites is micromechanical modeling. In this study, a Representative Volume Element (RVE) of a beech wood flour natural composite has been designed and the orientation averaging approach has been utilized to predict its stiffness tensor. The novelty of this work is in finding the proper fiber orientation distribution func...

متن کامل

Dynamic Mechanical Analysis of Compatibilizer Effect on the Mechanical Properties of Wood Flour - High-density Polyethylene Composites

In this study, effect of MAPE (maleic anhydride polyethylene) as the compatibilizer on the mechanical properties of wood-flour polyethylene composites has been investigated by using Dynamic Mechanical Analysis (DMA). Composites were made at 25% and 50% by weight fiber contents and 1% and 2% compatibilizer respectively. Controls were also made at the same fiber contents without the compatibilize...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2010