Fabrication and characterization of a negative-refractive-index composite metamaterial
نویسندگان
چکیده
We have designed, produced, and experimentally characterized 2.7 mm thick composite panels having negative refractive index between 8.4 and 9.2 GHz. The composite metamaterial is fabricated using conventional commercial multilayer circuit-board lithography; three-dimensional physical (as opposed to electromagnetic) structure is introduced by the use of vias to form sections of the scattering elements in the direction perpendicular to the circuit board surfaces. From scattering parameter measurements, we show that the complex permittivity, permeability, index, and impedance of the composite can be unambiguously determined. The measurements enable the quantitative determination of the negative index band and associated losses. The extracted material parameters are shown to be in excellent agreement with simulation results.
منابع مشابه
Microstrip Antenna Gain Enhancement using Near Zero Refractive Index Metamaterials
Some useful features of microstrip patch antennas are low profile, low weight and easy fabrication. However this type of antenna suffers from having a low gain, caused by propagation surface waves. In this paper, a new near zero refractive index metamaterial (MTM) unit cell is designed and fabricated as a superstrate over a Rectangular Microstrip Patch Antennas (RMPA). In order to obtain a maxi...
متن کاملA New Circular Polarization Metamaterial Ferrite Phase Shifter
In this paper, a new X band Metamaterial (MTM) based ferrite phase shifter is presented. The phase shifter is excited by circular polarized wave base on combination of TE10 and TE01 modes in a square waveguide. In order to synthesize negative refractive index metamaterial (NIM), negative permeability of ferrite slabs in extraordinary mode is mixed with the negative permitivity of printed period...
متن کاملA single-layer wide-angle negative-index metamaterial at visible frequencies.
Metamaterials are materials with artificial electromagnetic properties defined by their sub-wavelength structure rather than their chemical composition. Negative-index materials (NIMs) are a special class of metamaterials characterized by an effective negative index that gives rise to such unusual wave behaviour as backwards phase propagation and negative refraction. These extraordinary propert...
متن کاملAn Overview and Feasibility Study of Fabrication Technology and Characterization Techniques of Erbium-Doped Fiber amplifiers in Iran
In this paper, a brief summary of different methods of fabrication of optical preform and fiber is reviewed. Several methods of incorporation of erbium ions into optical preforms are studied. Characterization of the fabricated erbium doped fibers including measurements of refractive index profile, absorption, fluorescence and gain spectra and metastable lifetime are described. It is also expres...
متن کاملA dual band terahertz metamaterial absorber
We present the design, fabrication and characterization of a dual band metamaterial absorber which experimentally shows two distinct absorption peaks of 0.85 at 1.4 THz and 0.94 at 3.0 THz. The dual band absorber consists of a dual band electric-field-coupled (ELC) resonator and a metallic ground plane, separated by an 8μm dielectric spacer. Fine tuning of the two absorption resonances is achie...
متن کامل