Performance of Electrically Conductive Cvd Diamond as an Electrode for Edm
نویسندگان
چکیده
The reduction of electrode wear is very important for high finish and high accuracy machining in microEDM. Electrically conductive CVD diamond has shown almost zero electrode wear, even at short pulse duration of 3μs, which is extremely important for maintaining the desired shape. This research involves an investigation into the EDM performance of the electrically conductive CVD diamond with respect to electrode polarity, electrode wear and efficiency. An investigation into the factors responsible for the low wear of the electrically conductive CVD diamond electrode leads us to deduce that an accelerated deposition of heat resolved carbon along with the high thermal stability of the diamond are mainly responsible.
منابع مشابه
Potential of Electrically Conductive Chemical Vapor Deposited Diamond as an Electrode for Micro-Electrical Discharge Machining in Oil and Water
Low electrode wear is the key to achieving high finish and high accuracy machining in micro-electrical discharge machining (micro-EDM). Electrically conductive chemical vapor deposited (CVD) diamond has shown almost zero electrode wear, even at short pulse durations, which is extremely important for maintaining the electrode shape throughout the EDM process. This research involves an investigat...
متن کاملManufacturing of Micro V-groove with an Electrically Conductive Diamond Electrode in Edm
INTRODUCTION In order to realize successful fine and precise EDM, it is important to minimize the wear of the electrode under the condition of very small pulse duration. To cope with this issue, the authors focused attention on the electrically conductive CVD diamond (EC-CVD diamond here after) having very high thermal conductivity, and have already shown that an extremely low wear machining co...
متن کاملInfluence of Process Parameters and Electrode Shape Configuration On Material Removal Rate, Surface Roughness And Electrode Wear In Die Sinking EDM: A Review
Electrical discharge machining (EDM) is a non conventional manufacturing process which is used for shaping hard metals and forming deep complex shaped profiles by arc erosion in all kinds of electro-conductive materials. The objective of this paper is to study the influence of process parameters and electrode shape configuration on the machining characteristics such as surface quality, material...
متن کاملA Review: Influence of electrode geometry and process parameters on surface quality and MRR in EDM using Artificial Neural Network
Electrical Discharge Machining (EDM) is a non conventional machining process, where electrically conductive materials are machined by using precisely controlled sparks that occur between an electrode and a work piece in the presence of a dielectric fluid. It has been a demanding research area to model and optimize the EDM process in the present scenario. Lots of efforts have been exercised to m...
متن کاملNew Diamond Grinding Wheels with Electrically Conductive Cutting Edges
The application of an electrically conductive diamond material to a new type of grinding wheel whose cutting edges possess electrical conductivity has been tried in this research work. Firstly, electrical discharge machining is applied on a solid surface of an electrically conductive CVD diamond film to create protrusions like cutting edges. Secondly, it is confirmed that the EDMed surface of t...
متن کامل