Noxious gas detection using carbon nanotubes with Pd nanoparticles
نویسندگان
چکیده
Noxious gas sensors were fabricated using carbon nanotubes [CNTs] with palladium nanoparticles [Pd NPs]. An increase in the resistance was observed under ammonia for both CNTs and CNT-Pd sensors. Under carbon monoxide [CO], the two sensors exhibited different behaviors: for CNT sensors, their resistance decreased slightly with CO exposure, whereas CNT-Pd sensors showed an increase in resistance. The sensing properties and effect of Pd NPs were demonstrated, and CNT-Pd sensors with good repeatability and fast responses over a range of concentrations may be used as a simple and effective noxious gas sensor at room temperature.
منابع مشابه
Pt- and Pd-decorated MWCNTs for vapour and gas detection at room temperature
Here we report on the gas sensing properties of multiwalled carbon nanotubes decorated with sputtered Pt or Pd nanoparticles. Sputtering allows for an oxygen plasma treatment that removes amorphous carbon from the surface of the carbon nanotubes and creates oxygenated surface defects in which metal nanoparticles nucleate within a few minutes. The decoration with the 2 nm Pt or the 3 nm Pd nanop...
متن کاملModifying functionalized-carbon-nanotube capacity to enhance water-vapor adsorption capacity from nitrogen gas
The primary objective of this paper is to enhance the water-vapor-adsorption capacity of multiwall-carbon-nanotube (MWCNT) from nitrogen gas by grafting sulfonic acid groups and doping palladium nanoparticles into the adsorbent. MWCNT has been selected to be modified because of having homogeneous adsorption energy compared to silica gel. As a result, it is capable of creating isotherm having sh...
متن کاملMulti-walled carbon nanotubes supported palladium nanoparticles: Synthesis, characterization and catalytic activity towards methanol electro oxidation in alkaline media
Palladium nanoparticles supported on multi-walled carbon nanotubes (Pd/MWCNTs) have been synthesized using a modified polyol reduction method and its performance in methanol oxidation reactions has evaluated. The morphology of palladium on MWCNTs was characterized by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The catalytic performance of synthesized catalyst ...
متن کاملGas sensing properties of MWCNT layers electrochemically decorated with Au and Pd nanoparticles
Multiwalled carbon nanotube (MWCNT)-based chemiresistors were electrochemically decorated with Au and Pd nanoparticles (NPs), resulting in an improvement in the detection of gaseous pollutants as compared to sensors based on pristine MWCNTs. Electrophoresis was used to decorate MWCNTs with preformed Au or Pd NPs, thus preserving their nanometer-sized dimensions and allowing the metal content to...
متن کاملSensitive detection of Nitrogen Dioxide using gold nanoparticles decorated Single Walled Carbon Nanotubes
The modification of carbon nanotubes (CNTs) could enhance their surface and electric properties. To this purpose, we explore the impact of a thin layer of gold (Au) on the surface of single wall carbon nanotubes (SWCNTs). SWCNTs have been grown by Chemical Vapor Deposition (CVD) method and decorated with gold nanoparticles were investigated as gas sensitive materials for detecting nitrogen diox...
متن کامل