Lumped Equivalent Models of Complex Rf Structures∗
نویسنده
چکیده
The prediction of RF properties of complex accelerating structures is an important issue in computational accelerator physics. This paper describes the derivation of state space equations for complex structures based on real eigenmodes of sections of the decomposed complex structure. The state space equations enable the calculation of system responses due to port excitations by means of standard ordinary differential equation solvers. Therefore, the state space equations are referred to as lumped equivalent models of such complex RF structures. Besides fast computation of system responses, the equivalent models enable the calculation of secondary quantities such as external quality factors. The present contribution discusses theoretical aspects by means of a validation example.
منابع مشابه
Development of RF equivalent circuit models from physics-based device models
Modern device modeling codes enable the designer to simulate the behavior of nearly arbitrary 3-dimensional semiconductor device structures with multiple electrodes. However, the output of such programs is not a lumped element model that can be used in the design of RF circuits. Rather, such programs produce a (hopefully) good simulation of an experimental situation, as described by the device ...
متن کاملDynamic Response of Submerged Vertical Cylinder with Lumped Mass under Seismic Excitation
An analytical approach is presented to assess the response of offshore structures under seismic excitation. This paper evaluates the impacts of different fluid field models and the mass of equipment at the top of offshore structure which is simulated as lumped mass on the responses of offshore structures. To do this, two and three dimensional fluid field models are developed. In three dimension...
متن کاملA New Analytical Approach for Developing an Equivalent Circuit Simulation Model for a Chip Inductor, Based on Manufacturer Specifications Given in the Datasheet
Inductors represent a very complex behavior especially in the field of RF techniques. Some manufacturers offer SPICE models for their inductors built up by lumped elements. The lumped element values are determined by matching the simulation model to an average of the measurements. This leads to curious numbers, and if the model is used in a simulation tool, all these values have to be adjusted ...
متن کاملNovel Numerical Modelling of Lumped Circuit Elements in RF Coils for Identifying Resonant Frequencies
Introduction: Many different numerical approaches have been investigated in the past that are related to the topic of this research [1], but there seems to be an ever increasing need to model RF coils in real time, to better understand the field behaviour when an imaging sample is present. In this work the discrete numerical solution to Maxwells equation is investigated, with the aim of modell...
متن کاملAn Efficient Systematic Approach to Model Extraction for Passive Microwave Circuits
This paper introduces a new systematic approach to equivalent circuit model extraction for linear microwave passive circuits directly from full-wave frequency domain simulation. The devices being modeled may be either lossless or lossy. Adaptive frequency sampling is used to minimize the computational effort of EM simulation while critically assisting in determining the pole locations of an RF ...
متن کامل