Ternary System Al 2 O 3 – MgO – CaO : Part II , Phase Relationships in the Subsystem Al 2 O 3 – MgAl 2 O 4 – CaAl 4 O 7
نویسندگان
چکیده
Solid-state compatibility and melting relationships in the subsystem Al2O3–MgAl2O4–CaAl4O7 were studied by firing and quenching selected samples located in the isopletal section (CaOzMgO)–Al2O3. The samples then were examined using X-ray diffractomtery, optical microscopy, and scanning and transmission electron microscopies with wavelengthand energy-dispersive spectroscopies, respectively. The temperature, composition, and character of the ternary invariant points of the subsystem were established. The existence of two new ternary phases (Ca2Mg2Al28O46 and CaMg2Al16O27) was confirmed, and the composition, temperature, and peritectic character of their melting points were determined. The isothermal sections at 1650°, 1750°, and 1840°C of this subsystem were plotted, and the solid-solution ranges of CaAl4O7, CaAl12O19, MgAl2O4, Ca2Mg2Al28O46, and CaMg2Al16O27 were determined at various temperatures. The experimental data obtained in this investigation, those reported in Part I of this work, and those found in the literature were used to establish the projection of the liquidus surface of the ternary system Al2O3–MgO–CaO.
منابع مشابه
Synthesis and characterization of Mg1-xNixAl2O4 and their photocatalytic behaviors towards Congo red under UV light irradiation
In this paper, MgAl2O4 nanoparticles were synthesized by the Sol-gel auto combustion method and were doped with different concentrations of Ni2+ (x= 0, 0.1, 0.05, and 0.03). By this method, a novel photocatalyst which had better decolorization percentages of Congo redcompared to MgAl2O4 was produced. The MgAl2O4 sample...
متن کاملSynthesis, Structure, Spectroscopy and Photocatalytic Studies of Nano Multi-Metal Oxide MgO∙Al2O3∙ZnO and MgO∙Al2O3∙ZnO-Curcumin Composite
The mixed metal nanocomposite MgO∙Al2O3∙ZnO has been prepared by coprecipitation method. The product was characterized by XRD. The average particle size was found to be 34.89 nm from XRD data. SEM and SEM-EDS were studied for evaluating surface morphology and elemental composition. The FTIR spectrum of prepared mixed metal nanocomposites MgO∙Al2O3</s...
متن کاملEffect of Nano-Sized Fe2O3 on Microstructure and Hydration Resistance of MgO-CaO Refractories
In this work the effect of Nano-sized Fe2O3 on microstructure and hydration resistance of MgO-CaO refractories with 35 wt% CaO was investigated. MgO-CaO refractories with 35 wt% CaO content was prepared by using dolomite and magnesite calcined as starting materials and Nano-sized Fe2O3 (2,4, 6 and 8 wt%) as an additive. Samples were pressed into ...
متن کاملDevelopment of Synergic Mixed Metal Oxides for the Combined Catalytic-Absorptive Removal of Nitric Oxide from Diesel Exhaust
The NO removal over oxide sorbents (K2O/Al2O3 , CaO/Al2O3 and BaO/Al2O3) at a loading of up to 25 wt.% was investigated using a synthetic diesel exhaust gas containing 1,000 ppm NO, 1000 ppm iso-butane (i-C4H10), 8% O2 and N2 balance. The reactor was operated at 250 <su...
متن کاملIdentification of Calcium Sulphoaluminate Formation between Alunite and Limestone
This study was carried out to identify the conditions of formation of calcium sulphoaluminate (3CaO·3Al(2)O(3)·CaSO(4)) by the sintering of a limestone (CaCO(3)) and alunite [K(2)SO(4)·Al(2)(SO(4))(3)·4Al(OH)(3)] mixture with the following reagents: K(2)SO(4), CaCO(3), Al(OH)(3), CaSO(4)·2H(2)O, and SiO(2). When K(2)SO(4), CaCO(3), Al(OH)(3), CaSO(4)·2H(2)O were mixed in molar ratios of 1:3:6:3...
متن کامل