Identification of Operating Parameters Most Strongly Influencing the Jetting Performance in a Piezoelectric Actuator-Driven Dispenser

This work identifies crucial operating parameters which most significantly influence the jetting performances of piezostack-driven non-contact dispensers. This is achieved through experimental investigation and statistical analysis. After introducing the configuration and operating principle of the piezoelectric jetting dispenser, an experimental setup is constructed in order to test the jetting performance, such as the dispensed amount. After selecting four significant operating parameters for the light-emitting diode (LED)-packaging process, two levels for each parameter are considered. Subsequently, the weight of a single dispensed dot is measured 100 times, and the average weight and standard deviation are calculated for each experimental set. The results are then statistically analyzed using a commercial software package. Finally, the crucial operating parameters which provide a low average weight and a minimum variation in the weight of a single dispensed dot are identified.