Effect of cylinder proximity to the wall on channel flow heat transfer enhancement
نویسندگان
چکیده
a r t i c l e i n f o a b s t r a c t Heat-transfer enhancement in a uniformly heated slot mini-channel due to vortices shed from an adiabatic circular cylinder is numerically investigated. The effects of gap spacing between the cylinder and bottom wall on wall heat transfer and pressure drop are systemically studied. Numerical simulations are performed at Re = 100, 0.1 Pr 10 and a blockage ratio of D/H = 1/3. Results within the thermally developing flow region show heat transfer augmentation compared to the plane channel. It was found that when the obstacle is placed in the middle of the duct, maximum heat transfer enhancement from channel walls is achieved. Displacement of circular cylinder towards the bottom wall leads to the suppression of the vortex shedding, the establishment of a steady flow and a reduction of both wall heat transfer and pressure drop. Performance analysis indicates that the proposed heat transfer enhancement mechanism is beneficial for low-Prandtl-number fluids.
منابع مشابه
Investigation of flow and heat transfer of nanofluid in a diverging sinusoidal channel
Using of nanofluids and ducts with corrugated walls are both supposed to enhance heat transfer, by increasing the heat transfer fluid conductivity and the heat transfer area respectively. Use of a diverging duct with a jet at inlet section may further increase heat transfer by creating recirculation zones inside the duct. In this work two-dimensional incompressible laminar flow of a nanofluid e...
متن کاملInvestigation of flow and heat transfer of nanofluid in a diverging sinusoidal channel
Using of nanofluids and ducts with corrugated walls are both supposed to enhance heat transfer, by increasing the heat transfer fluid conductivity and the heat transfer area respectively. Use of a diverging duct with a jet at inlet section may further increase heat transfer by creating recirculation zones inside the duct. In this work two-dimensional incompressible laminar flow of a nanofluid e...
متن کاملHeat Transfer Enhancement of a Flat Plate Boundary Layer Distributed by a Square Cylinder: Particle Image Velocimetry and Temperature-Sensitive Paint Measurements and Proper Orthogonal Decomposition Analysis
The current empirical study was conducted to investigate the wall neighborhood impact on the two-dimensional flow structure and heat transfer enhancement behind a square cylinder. The low- velocity open-circle wind tunnel was used to carry out the study tests considering the cylinder diameter (D)-based Reynolds number (ReD) of 5130. The selected items to compare were different gap he...
متن کاملEFFECT OF TIME-DEPENDENT TRANSPIRATION ON AXISYMMETRIC STAGNATION-POINT FLOW AND HEATTRANSFER OF A VISCOUS FLUID ON A MOVING CIRCULAR CYLINDER
Effect of time dependent normal transpiration on the problem of unsteady viscous flow and heat transfer in the vicinity of an axisymmetric stagnation point of an infinite circular cylinder moving simultaneously with time-depended angular and axial velocities and with time-dependent wall temperature or wall heat flux are investigated. The impinging free stream is steady with a strain rate . A re...
متن کاملStudy of flow and heat transfer characteristics in a periodic zigzag channel for cooling of polymer electrolyte fuel cells
In this study, a periodic zigzag channel with rectangular cross-section has been used in order to obtain a high-efficiency system for cooling a polymer electrolyte fuel cell. An appropriate function of fuel cells and enhancement of their lifetime require uniform temperature conditions of around 80°C. On the other hand, due to volume and weight constraints, a low-density compact heat exchanger i...
متن کامل