Molecular Dynamics Simulation in Nanoscale Heat Transfer: A review
نویسندگان
چکیده
Molecular Dynamics Simulation in Nanoscale Heat Transfer: A review D. Poulikakos, S. Arcidiacono Laboratory of Thermodynamics in Emerging Technologies, Institute of Energy Technology, Department of Mechanical and Process Engineering, Swiss Federal Institute of Technology, ETH Center, CH-8092, Zurich Switzerland, [email protected], www.ltnt.ethz.ch and Shigeo Maruyama Department of Mechanical Engineering, The University of Tokyo, 7-3-1 Hongo, Bunkyo-ku, Tokyo 113-8656, Japan, [email protected], www.photon.t.u-tokyo.ac.jp
منابع مشابه
Thermal conductivity calculation of magnetite using molecular dynamics simulation
In the current research, thermal conductivity of magnetite (Fe3O4) has been calculated using molecular dynamic simulation. The rNEMD Molecular Dynamics Method provided in the LMMPS package is used for the simulation of the thermal conductivity. The effects of magnetite layer size and temperature on the thermal conductivity have been investigated. The numerical results have...
متن کاملMolecular Dynamics Simulation of Water in Single WallCarbon Nanotube
The overall aim of this study is to calculate some water properties in the single wall carbon naotubes (SWCNT) and compare them to the bulk water properties to investigate the deviation of water properties inside the SWCNT from those in the bulk. Here some physical and transport properties of water molecules in the single wall carbon nanotube were reported by performing molecular dynamics (MD) ...
متن کاملMolecular dynamics methods in microscale heat transfer
In normal heat transfer and fluid flow calculations, the fluid phases are treated as being continuous with properties such as viscosity and thermal conductivity being assumed to be only a function of local pressure, composition and temperature in the flow domain. However, as the size of the flow domain (the channel) becomes smaller and smaller, the continuum treatment breaks down since, in real...
متن کاملHeat Transfer Analysis of Nanofluid in a Sine Wave Plate Heat Exchanger
Heat transfer is one of the most critical processes in the industry, and by increasing the efficiency of the heat exchanger, energy consumption of systems will be reduced. Very tiny particles in nanoscale dimensions, when uniformly dispersed and stably suspended in the base fluid, efficiently improve the thermal properties of the base fluid. With the help of nanofluids, the heat transfer rate i...
متن کاملComparison of Heat Transfer Power of the Cooling Panel with Square Cross Section and Circular Cross Section in Electric Arc Furnaces Steelmaking by the use of Computational Fluid Dynamics
Steel pipes with circular cross-sections are usually used in cooling panels of electric arc furnaces. In the present study pipes with square cross-sections under equivalent conditions were used to obtain more information on the possibility of increasing the heat transfer and cooling efficiency. The results showed increased efficiency of the square pipe compared to the circular cross-section pip...
متن کامل