Analysis and design of a tactile sensor detecting strain distribution inside an elastic finger
نویسندگان
چکیده
Humans obtain complex information using different tactile receptors in the skin of the finger. Artificial tactile sensors capable of detecting complex information can be realized by imitating certain characteristics of the human finger, such as the geometry of the finger and the location of the tactile receptors. In the present paper, we analyzed the strain distribution that occurs inside an elastic finger having a curved surface when the finger is in contact with an object. Detection of the shear strain distribution pattern was found to be important. In addition, a strain distribution sensor was developed, in which strain gages bonded on thin plates are arranged at uniform intervals inside the curved surface of an elastic finger made of silicone rubber. The geometry of the elastic finger was designed by calculating the contact condition between the finger and objects with/without tangential load using FE (Finite Element) analysis. The fundamental characteristics of the strain distribution sensor were confirmed.
منابع مشابه
Design and Modeling of a New Type of Tactile Sensor Based on the Deformation of an Elastic Membrane
This paper presents the design and modeling of a flexible tactile sensor, capable of detecting the 2D surface texture image, contact-force estimation and stiffness of the sensed object. The sensor is made of polymer materials. It consists of a cylindrical chamber for pneumatic actuation and a membrane with a mesa structure. The inner radius of the cylindrical chamber is 2cm and its outer radius...
متن کاملGeometry design of an elastic finger-shaped sensor for estimating friction coefficient by pressing any object
Authors have proposed a method for detecting a friction coefficient between a planar object and an elastic finger-shaped sensor by only pressing the sensor against the object in our previous study. In the present study, an elastic finger-shaped sensor made of silicone rubber is designed and produced. First, geometry of the finger-shaped sensor is designed using finite element analysis (FEA). Re...
متن کاملDesign, Modeling, and Construction of a New Tactile Sensor for Measuring Contact-Force
This paper presents the design, modeling, and testing of a flexible tactile sensor and its applications. This sensor is made of polymer materials and can detect the 2D surface texture image and contact-force estimation. The sensing mechanism is based on the novel contact deflection effect of a membrane. We measure the deflection of the membrane with measuring the strain in the membrane with emb...
متن کاملDesign of Artificial Finger Skin Having Ridges and Distributed Tactile Sensors
An artificial elastic finger for grasping an object, which we call an “artificial finger skin” is designed. Characteristics of the artificial finger skin are as follows: First, it has ridges at the surface and tactile sensors distributed underneath the ridges same as finger of human. Second, it has a curved surface in broad perspective. Third, it is made of an elastic silicone rubber so as to t...
متن کاملDesign and Construction of a New Capacitive Tactile Sensor for Measuring Normal Tactile Force
This paper presents the design, construction and testing of a new capacitive tactile sensor for measurement of normal tactile force. The operation of proposed sensor has been investigated in ASTABLE and MONOSTABLE circuits. According to the results of these circuits the deviation of ASTABLE circuit results is less than MONOSTABLE circuit results. In addition, the results obtained from ASTABLE c...
متن کامل