Trailing Edge Noise Computation of a Fan Blade Profile
نویسندگان
چکیده
Julien Christophe, Stéphane Moreau, Jérome Anthoine 1 von Karman Institute for Fluid Dynamics, 72 Chaussée de Waterloo, 1640 Rhode-St-Genèse, Belgium, [email protected] 2 Université de Sherbrooke, 2500 Boulevard de l’Université, Sherbrooke, J1K 2R1 Québec, Canada, [email protected] 3 ONERA The French Aerospace Lab, Midi-Pyrenees Center, Mauzac, France, [email protected]
منابع مشابه
Simulating Cooling Injection Effect of Trailing Edge of Gas Turbine Blade on Surface Mach Number Distribution of Blade
In this research, a gas turbine blade cascade was investigated. Flow analysis around the blade was conducted using RSM and RNG.K-ε turbulence modeling and it is simulated by Fluent software. The results were considered for the cases as Mach number loss at the trailing edge of blade caused by vortexes that were generated at the end of blade. Effect of cooling flow through the trailing edge on th...
متن کاملTWENTYFIFTH EUROPEAN ROTORCRAFT FORUM Paper n G18 STABILIZATION OF A BLADE WITH A SEVERED PITCH LINK USING A TRAILING EDGE FLAP BY
This paper addresses the feasibility of using trailing edge flaps to reconfigure a helicopter rotor blade following a failure of the pitch link, which makes the blade freefloating in pitch and otherwise uncontrollable. A coupled rotor-fuselage model is developed which allowed for rotor anisotropy. A new, optimization-based, trim procedure is developed to determine the dynamics of the failed bla...
متن کاملApplication of Phased Array in the Study of Linear Cascade Noise Reduction on the Indoor Test Bed
A measurement technique with microphone array conventional beamforming for indoor linear cascade noise test is developing in NPU (Northwestern Polytechnical University of China) to quantify differences of sound source levels of linear cascade as a result of blade trailing edge modifications. The useful practical experience has been gained during this test. The special indoor microphones placeme...
متن کاملبررسی عددی تاثیرنسبت تزریق و زوایای انحرافی در عملکرد آدیاباتیک خنک کاری لایه ای
Film Cooling Adiabatic Effectiveness on a Specific Profile of a Gas Turbine blade that Using Holes with 25 and 45 Degree Combined Angles to the Flow Direction and Radial Along the Attack Edge as well as 25 Degree Angles to the Flow Direction and Surface Area of the Attack Edge Area , Under two different blowing ratios, using the Reynolds stress approach and the SST turbulence model, have been i...
متن کاملتحلیل عددی جریان سیال حول مقطع پروانه نیمه مغروق با پروفیل لبه انتهایی خطی در اعداد وبر متفاوت
In this study, two-dimensional flow analysis around cross-section of the surface piercing propeller with a linear profile trailing edge is studied in different Weber numbers. Due to collision of the two-dimensional cross section with surface water, aeration zone is created on the suction side that is heavily impact on the results. The ventilation pattern is a function of the geometrical paramet...
متن کامل