About the Reliability of Numerical Simulated Time Dependent Current and Torque Courses of Converter Fed Induction Motors
نویسنده
چکیده
Undesired secondary effects occurring at inerter-fed squirrel cage induction motors are investigated by a transient two-dimensional finite element analysis with coupled electrical circuits. Calculated time-dependent numerical courses are compared to measured ones. A novel and deeper insight into the invoked harmonic spectrum of the electrical stator current and the mechanical torque at the rotating shaft is given.
منابع مشابه
Current Limitation and Speed Drop Minimization in Optimal-Efficiency of Induction Motors
In conventional direct torque control (DTC), the stator flux is usually kept constant by controlling the x-axis component of the stator voltage in the stator flux reference frame. The torque is then controlled by the y-axis component of stator voltage. In this scenario, the stator current does not exceed its permissible value. However, in the so-called optimal efficiency mode, the induction mot...
متن کاملFuzzy Logic-Based Vector Control of Permanent Magnet Synchronous Motor Using Stacked Matrix Converter for Railway Traction Applications
Recently, Permanent Magnet Synchronous Motors (PMSMs) have been widely accepted and employed in traction and railway transportation applications due to their various advantages such as small inertia, high efficiency and high torque density. In this paper, in order to use these motors as traction drives in an effective way, the vector control scheme is employed. In this strategy, the stator curr...
متن کاملA Comparative Study on Predictive and ISVM Direct Torque Control Methods for a Doubly Fed Induction Machine Fed by an Indirect Matrix Converter
This paper presents a comparative study on the Predictive Direct Torque Control method and the Indirect Space Vector Modulation Direct Torque Control method for a Doubly-Fed Induction Machine (DFIM) which its rotor is fed by an Indirect Matrix Converter (IMC). In Conventional DTC technique, good transient and steady-state performances are achieved but it presents a non constant switching fr...
متن کاملA Novel Stand-Alone Single-Phase Induction Generator Using a Three-Phase Machine and a Single-Phase PWM Inverter
A new type of single-phase stand-alone induction generator using a three-phase induction machine and a single-phase voltage-source PWM inverter is introduced. The generator scheme is capable of producing constant load frequency with a very well regulated output voltage. A small lead acid battery and a single-phase full diode-bridge rectifier are used to feed the inverter. The inverter feeds one...
متن کاملDirect Torque Control of Induction Machine Fed by a Matrix Converter
The matrix converter system is competitive solution to replace the conventional two stage ac to ac converter. In this paper, a matrix converter driving a speed-controlled induction machine is examined under open-switch fault. First, a-predictive direct torque method is proposed using only the motor torque and current. Second, a motor speed control is presented. The proposed techniques do not re...
متن کامل