Effect of High-pressure Processing on Texture and Drying Behavior of Pineapple
نویسندگان
چکیده
The effect of high-pressure processing on texture and drying behavior of pineapple slices was investigated. Pineapple slices were high pressure processed at 50, 100, 300, 500 and 700 MPa at 25C for 10 min. The control, hot water-blanched and high-pressure processed samples were then dehydrated at 70C. Application of high pressure reduced the sample hardness, springiness and chewiness while it had no significant effect on cohesiveness of pineapple. Elevated pressure treatment ( 500 MPa) reduced drying time more effectively than for the other pretreated samples. Experimental dehydration data were empirically fitted using six thin-layer drying models. Among the models tested, logarithmic model best described the drying behavior of pineapple slices. The effective moisture diffusivity was found to increase with an increase in the level of pressure up to 500 MPa, and the samples processed at 500 and 700 MPa had higher diffusivity values than blanched samples. PRACTICAL APPLICATIONS This work shows that high-pressure blanching of pineapple can be an alternative for hot water blanching, before dehydration. The results may find application in development of quality snack food from pineapple fruits. 3 Corresponding author. TEL: +1-765-494-9772; FAX: +1-765-496-1115; EMAIL: arpkingsly@ rediffmail.com * Present Address: Department of Agricultural and Biological Engineering, Purdue University, West Lafayette, IN 47907. Journal of Food Process Engineering 32 (2009) 369–381. All Rights Reserved. © Copyright the Authors Journal Compilation © 2008 Wiley Periodicals, Inc. DOI: 10.1111/j.1745-4530.2007.00221.x 369
منابع مشابه
Effects of Non-Thermal Processing Methods on Physicochemical, Bioactive, and Microbiological Properties of Fresh Pineapple (Ananas comosus L. Merr.) Juice
Background: Pineapple juice processing is an art of preservation, and the processing technologies play important role in pineapple juice quality. Therefore, this study aimed to explore the potential impacts of non-thermal processing methods on the physicochemical, bioactive, and microbiological properties of fresh pineapple juice. Methods: Extracted juices were subjected to several non-thermal...
متن کاملThe effect of twinning on texture evolution during ECAP processing of an AM30 magnesium alloy
An AM30 magnesium alloy was processed through ECAP method at 200 °C. Optical and transmission electron microscopy as well as electron back scattered diffraction (EBSD) technique were employed to characterize the deformed microstructure. A partially recrystallized microstructure including ultrafine/nano structures was obtained. The area fraction of 49% was measured for the recrystallized regions...
متن کاملEffect of Ultrasonic, Microwave, Chemical, and Osmotic Pre-Treatments on Quality Indexes (Texture, Color, and Rehydration Ratio) of Dried Button Mushroom Slices in Hot Air Drying
Objective: Button mushrooms (Agaricus Bisporus) are among the most widely produced and consumed mushrooms in the world. Generally speaking, mushrooms are of great nutritional value, which due to their high content of moisture and their corruptibility particular attention is required to be paid to their conservation and health. Drying is one of the most important ways to preserve the yi...
متن کاملEffect of Processing Temperature on Storage Quality of In-Shell Hazelnut
Background: Drying is the one of the oldest methods for increasing the shelf life of food products. The objective of the present study was evaluation of effect of different drying temperatures on drying time and storage quality parameters of in-shell hazelnut. Methods: Hazelnuts were dried as a thin layer at three temperatures (40, 50, and 60 °C). The time required for drying and quality param...
متن کاملCFD Study and Energy Optimization of Industrial Double-Cyclone in HDPE Drying Process
In this paper, a double-cyclone is used as a gas-solid separator in the fluid bed-drying process to prepare dry HDPE powder from a wet feed of 56000 kg/hr. The quality of dry HDPE depends mainly on particles behavior and flow pattern in the dryer which affect the double-cyclones as an effective equipment in this process. Controlling of the inlet carrier gas causes excellent flow pattern, desire...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2009