Initial stage of the biofilm formation on the NiTi and Ti6Al4V surface by the sulphur-oxidizing bacteria and sulphate-reducing bacteria

The susceptibility to the fouling of the NiTi and Ti6Al4V alloys due to the adhesion of microorganisms and the biofilm formation is very significant, especially in the context of an inflammatory state induced by implants contaminated by bacteria, and the implants corrosion stimulated by bacteria. The aim of this work was to examine the differences between the sulphur-oxidizing bacteria (SOB) and sulphate-reducing bacteria (SRB) strains in their affinity for NiTi and Ti6Al4V alloys. The biofilms formed on alloy surfaces by the cells of five bacterial strains (aerobic SOB Acidithiobacillus thiooxidans and Acidithiobacillus ferrooxidans, and anaerobic SRB Desulfovibrio desulfuricans-3 strains) were studied using scanning electron microscopy (SEM) and confocal laser scanning microscopy (CLSM). The protein concentrations in liquid media have also been analyzed. The results indicate that both alloys tested may be colonized by SOB and SRB strains. In the initial stage of the biofilm formation, the higher affinity of SRB to both the alloys has been documented. However, the SOB strains have indicated the higher (although differentiated) adaptability to changing environment as compared with SRB. Stimulation of the SRB growth on the alloys surface was observed during incubation in the liquid culture media supplemented with artificial saliva, especially of lower pH (imitated conditions under the inflammatory state, for example in the periodontitis course). The results point to the possible threat to the human health resulting from the contamination of the titanium implant alloys surface by the SOB (A. thiooxidans and A. ferrooxidans) and SRB (D. desulfuricans).