Coupled discrete/continuum simulations of the impact of granular slugs with clamped beams: Stand-off effects
نویسندگان
چکیده
Coupled discrete particle/continuum simulations of the normal (zero obliquity) impact of granular slugs against the centre of deformable, end-clamped beams are reported. The simulations analyse the experiments of Uth et al. (2015) enabling a detailed interpretation of their observations of temporal evolution of granular slug and a strong stand-off distance dependence of the structural response. The high velocity granular slugs were generated by the pushing action of a piston and develop a spatial velocity gradient due to elastic energy stored during the loading phase by the piston. The velocity gradient within the “stretching” slug is a strong function of the inter-particle contact stiffness and the time the piston takes to ramp up to its final velocity. Other inter-particle contact properties such as damping and friction are shown to have negligible effect on the evolution of the granular slug. The velocity gradients result in a slug density that decreases with increasing stand-off distance, and therefore the pressure imposed by the slug on the beams is reduced with increasing stand-off. This results in the stand-off dependence of the beam’s deflection observed by Uth et al. (2015) . The coupled simulations capture both the permanent deflections of the beams and their dynamic deformation modes with a high degree of fidelity. These simulations shed new light on the stand-off effect observed during the loading of structures by shallow-buried explosions. © 2017 Elsevier Ltd. All rights reserved. M t h s e 2 d p u 2 r t f F t t B
منابع مشابه
The effect of inclination and stand-off on the dynamic response of beams impacted by slugs of a granular material
The dynamic response of end-clamped sandwich and monolithic beams to impact by high-velocity tungsten carbide (WC) particle columns (slugs) has been measured with the aim of developing an understanding of the interaction of ejecta from a shallow-buried explosion with structures. The monolithic beams were made from stainless steel, while the sandwich beams of equal areal mass comprised stainless...
متن کاملThe impact of sand slugs against beams and plates: Coupled discrete particle/finite element simulations
The impact of a slug of dry sand particles against a metallic sandwich beam or circular sandwich plate is analysed in order to aid the design of sandwich panels for shock mitigation. The sand particles interact via a combined linear-spring-and-dashpot law whereas the face sheets and compressible core of the sandwich beam and plate are treated as rate-sensitive, elastic–plastic solids. The major...
متن کاملVibration analysis of a Timoshenko non-uniform nanobeam based on nonlocal theory: An analytical solution
In this article free vibration of a Timoshenko nanobeam with variable cross-section is investigated using nonlocal elasticity theory within the scope of continuum mechanics. Small scale effects are modelled after Eringen’s nonlocal elasticity theory while the non-uniformity is presented by exponentially varying width through the beam length with constant thickness. Analytical solution is achiev...
متن کاملDiscrete Element Modeling of Dynamic Compaction with Different Tamping Condition
Dynamic Compaction (DC) is a common deep compaction method that is usually used for densification of coarse-grained soils. Although traditional continuum-based models such as the Finite Element Method can be successfully applied for assessment of stress distributions or deformations induced by DC, they are typically not adequate for capturing the grain scale mechanisms of soil behavior under im...
متن کاملA Study of the Wave Propagation Velocity in Granular Soils Using Discrete Element Method (DEM)
In the present paper, discrete element method (DEM) is used to study wave propagation phenomenon in granular soils. The effect of factors such as coefficient of friction, frequency, normal stiffness and soil gradation on the wave velocity is studied. Using the wall motion based on the sinusoidal function is the method of loading used in this simulation, through which the pressure wave is transf...
متن کامل