Effect of Sulfur on the TTT Diagram of CaO–Al2O3 Slag at Eutectic Composition
نویسندگان
چکیده
1) Graduate School of Energy Science and Technology, Kyoto University, Yoshida Honmachi, Sakyoku, Kyoto, 606-8501 Japan. 2) Formerly Graduate Student, Graduate School of Eng., Hokkaido University. Now at Nippon Steel Corporation. Ohita Works, Nishi-no-su, Ohita, 870-0992 Japan. 3) Graduate School of Eng., Faculty of Engineering, Hokkaido University. Kita-13Jou, Nishi-8Choume, Kita-ku, Sapporo, Hokkaido, 060-8628 Japan.
منابع مشابه
EFFECT OF A FOURTH COMPONENT (Na2O, SrO, MgO AND BaO) ADDITION TO CaO-Al2O3-SiO2 SYNTHETIC SLAG ON SULFUR REMOVAL FROM PLAIN CARBON STEEL
In this paper, the effect of MgO, BaO, Na 2 O and SrO addition to a pre-melted CaO-Al2O3 -Si 2 O synthetic slag on sulfur removal from plain carbon steel was studied under the same experimental conditions. The slags were pre-melted at 1400°C in an electric resistant furnace and desulfurization experiments were carried out in a high frequency induction furnace. The results showed that ...
متن کاملMECHANICAL AND CHEMICAL PROPERTIES OF SiO2-Al2O3-CaO-MgO (R2O) GLASS CERAMICS IN THE PRESENCE OF VARIOUS NUCLEATING AGENTS
Abstract: The application of inexpensive materials such as copper, zinc, lead, iron and steel slag in manufacturing of glass and glass-ceramic products in construction industry, lining materials as anti-corrosion and anti-abrasion coatings in metals and etc, has led to considerable progress in glass technology in recent years. The composition of slag glass-ceramics is mainly located in the ...
متن کاملThe Effect of CaF2 Content in Hot Metal Pretreatment Flux Based on Lime
This research was conducted for the purpose of studying the effect of CaF2 content in the composition of hot metal pretreatment flux, based on lime. It was followed in regards to the importance of fluorine amount decrease in hot metal pretreatment and steel making processes. For this purpose, lime based fluxes including 40, 30, 20 and 10 percent calcium fluoride were prepared and hot metal pret...
متن کاملThe Effect of Flux type and Oxygen Blowing on Simultaneous Removal of Phosphorus and Sulfur from Molten Iron
This research was conducted to study the effect of lime based Flux with the composition of CaO-20%CaF2-8%FeO on simultaneous removal of phosphorus and Sulfur from hot metal. The effects of Na2O and oxygen blowing were also studied. The experiments were performed using an induction furnace and hot metal produced in Isfahan Steel Company in the temperature range 1350-1450 ºC...
متن کاملMulti-Stage Control of Waste Heat Recovery from High Temperature Slags Based on Time Temperature Transformation Curves
This paper presents a significant method and a basic idea of waste heat recovery from high temperature slags based on Time Temperature Transformation (TTT) curves. Three samples with a fixed CaO/SiO2 ratio of 1.05 and different levels of Al2O3 were designed and isothermal experiments were performed using a Single Hot Thermocouple Technique (SHTT). The TTT curves established through SHTT experim...
متن کامل