Evaluation of Fenton oxidation process coupled with biological treatment for the removal of reactive black 5 from aqueous solution

نویسندگان

  • Pegah Bahmani
  • Roshanak Rezaei Kalantary
  • Ali Esrafili
  • Mitra Gholami
  • Ahmad Jonidi Jafari
چکیده

Biodegradation of azo dyes is difficult due to their complex structures and low BOD to COD ratios. In the present study, the efficiency of using Fenton's reagent (H2O2 + Fe2+) as a pretreatment process to enhance microbial transformation of reactive black 5 (RB5) in an aqueous system was evaluated. The RB5 with an initial concentration of 250 mg/L was decolorized up to 90% in 60 h by using a bacterial consortium. Fenton's reagent at a Fe2+ concentration of 0.5 mM and H2O2 concentration of 2.9 mM (molar ratio, 1:5.8) was most effective for decolorization at pH = 3.0. The extent of RB5 removal by the combined Fenton-biotreatment was about 2 times higher than that of biotreatment alone. The production of some aromatic amines intermediates implied partial mineralization of the RB5 in Fenton treatment alone; in addition, decreasing of GC-MS peaks suggested that dearomatization occurred in Fenton-biological process. Fenton pretreatment seems to be a cost-effective option for the biotreatment of azo dyes, due mainly to the lower doses of chemicals, lower sludge generation, and saving of time. Our results demonstrated positive effects of inoculating bacterial consortium which was capable of dye biodegradation with a Fenton's pretreatment step as well as the benefits of low time required for the biological process. In addition, the potential of field performance of Fenton-biological process because of using bacterial consortium is an other positive effect of it.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Evaluating the Fenton Process Efficiency in Removal of Reactive Red 2 from Aqueous Solution

Introduction: Dyes are visible materials and are considered as one of the hazardous components that make up industrial waste. Therefore it is removed from bodies of water, using various methods. In this regard, the Fenton oxidation process is one of the most effective ways to remove colored contaminants in aquatic environments, which has many applications today. Materials and Methods: In this...

متن کامل

Comparing Fenton Oxidation with Conventional Coagulation Process for RR198 Dye Removal from Aqueous Solutions

Background and objective: The wastewater discharged from textile industries is one of the main environmental pollutants that causes many problems for the environment if it is not treated or discharged. The present study compared Fenton oxidation process with coagulation and flocculation using the natural coagulant of Sodium Alginate in order to remove Reactive Red 198 Dye. Materials and method...

متن کامل

Application of Electro-Fenton (EF) Process to the Removal of Pentachlorophenol from Aqueous Solutions

Pentachlorophenol (PCP) is a very hazardous compound which enters into the environment by industries such as refineries and petrochemicals. As its biological degradation is very slow, this use may cause the pollution of soils and groundwater; with the recent emergence of pentachlorophenol contamination as an important drinking water quality issue, finding an easy, economical, and useful method ...

متن کامل

Decolorization of Cationic and Anionic Textile Blue Dyes from Aqueous Solution with Advanced Oxidation Process Using H2O2 and Various Catalysts

In this study, we used advanced oxidation process (AOP)for the removal of a cationic and anionic blue dyes, namely Basic Blue 3 (BB3) and Acid blue 62(AB62), from aqueous solutions. Fenton reactions are mixture of H2 O2 and Fe2+. However this paper investigates the application of twelve different catalysts such as: FeCl2 , FeSO4, (NH4 )Fe(SO4 )2 , FeCl3 , Nano iron (Fe0 ), Fe(NO3 )3 , K2FeO4 , ...

متن کامل

Removal N-Methyl Pyrrolidone from petrochemical effluent using photo-Fenton process: a case study of Mahshahr port petrochemical unit

Background and Objective: N-methylpyrrolidine is a highly potent solvent with toxic and adverse ecological properties that has historically been widely used in the chemical and petrochemical industries. Due to the health and safety، toxicity and environmental effects of effluents containing NMP، these effluents should be pre-treated before biological treatment methods. The aim of this study was...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره 11  شماره 

صفحات  -

تاریخ انتشار 2013