3D Microstructure Effects in Ni-YSZ Anodes: Influence of TPB Lengths on the Electrochemical Performance
نویسندگان
چکیده
3D microstructure-performance relationships in Ni-YSZ anodes for electrolyte-supported cells are investigated in terms of the correlation between the triple phase boundary (TPB) length and polarization resistance (Rpol). Three different Ni-YSZ anodes of varying microstructure are subjected to eight reduction-oxidation (redox) cycles at 950 °C. In general the TPB lengths correlate with anode performance. However, the quantitative results also show that there is no simplistic relationship between TPB and Rpol. The degradation mechanism strongly depends on the initial microstructure. Finer microstructures exhibit lower degradation rates of TPB and Rpol. In fine microstructures, TPB loss is found to be due to Ni coarsening, while in coarse microstructures reduction of active TPB results mainly from loss of YSZ percolation. The latter is attributed to weak bottlenecks associated with lower sintering activity of the coarse YSZ. The coarse anode suffers from complete loss of YSZ connectivity and associated drop of TPBactive by 93%. Surprisingly, this severe microstructure degradation did not lead to electrochemical failure. Mechanistic scenarios are discussed for different anode microstructures. These scenarios are based on a model for coupled charge transfer and transport, which allows using TPB and effective properties as input. The mechanistic scenarios describe the microstructure influence on current distributions, which explains the observed complex relationship between TPB lengths and anode performances. The observed loss of YSZ percolation in the coarse anode is not detrimental because the electrochemical activity is concentrated in a narrow active layer. The anode performance can be predicted reliably if the volume-averaged properties (TPBactive, effective ionic conductivity) are corrected for the so-called short-range effect, which is particularly important in cases with a narrow active layer.
منابع مشابه
3D Microstructure Effects in Ni-YSZ Anodes: Prediction of Effective Transport Properties and Optimization of Redox Stability
This study investigates the influence of microstructure on the effective ionic and electrical conductivities of Ni-YSZ (yttria-stabilized zirconia) anodes. Fine, medium, and coarse microstructures are exposed to redox cycling at 950 °C. FIB (focused ion beam)-tomography and image analysis are used to quantify the effective (connected) volume fraction (Φeff), constriction factor (β), and tortuos...
متن کاملImportance of oxygen spillover for fuel oxidation on Ni/YSZ anodes in solid oxide fuel cells.
Using first principles simulations and the Monte Carlo method, the optimal structure of the triple-phase boundaries (TPB) of the Ni/Yttria-Stabilized Zirconia (YSZ) anode in solid oxide fuel cells (SOFCs) is determined. Based on the new TPB microstructures we reveal different reaction pathways for H2 and CO oxidation. In contrast to what was believed in previous theoretical studies, we find tha...
متن کاملThe Influence of Sulfur Poisoning and YSZ Substrate Orientation on Electrochemical Properties of Nickel Pattern Anodes
Micro-patterned Ni thin films with well-defined 2D-structures are useful to examine electrochemical reaction kinetics of SOFC anodes. In this work, an electrode preparation method is developed yielding stable Ni pattern electrodes on YSZ, which facilitate long term measurements. Moreover, these stable electrodes allowed investigating the effect of the YSZ substrate orientation on the polarizati...
متن کاملElectrochemical Oxidation Kinetics of Hydrogen and Higher Hydrocarbon Fuels on Solid Oxide Fuel Cells
Title of Document: ELECTROCHEMICAL OXIDATION KINETICS OF HYDROGEN AND HIGHER HYDROCARBON FUELS ON SOLID OXIDE FUEL CELLS. Oktay Demircan, Ph.D., 2007 Dissertation Directed By: Professor Bryan W. Eichhorn, Department of Chemistry and Biochemistry Solid oxide fuel cells (SOFCs) are promising electrochemical energy converting devices due to their ability to use not only hydrogen but also hydrocarb...
متن کاملCharacterization of the Electrochemical Performance of YSZ Thin
In this work, thin film yttria-stabilized zirconia [YSZ] solid electrolytes were sputtered onto insulating substrates at room temperature and 600oC in order to produce different average grain sizes (~15-50 nm). For reference, polished samples of single crystal and bulk, poly-crystalline YSZ were also used. Platinum film electrodes were then sputtered on top and lithographically patterned to giv...
متن کامل