Modeling-assisted Perturbation Technique for Measurement of Complex Permittivity
نویسندگان
چکیده
Basic assumption and accuracy of complex permittivity measurement by perturbation technique are proposed to be verified by FDTD simulation of experimental cavity with QuickWave-3D. Determination of dielectric constant and loss factor of a piece of wet movie-film in rectangular resonator is shown to be very sensitive to film position and approved to be valid for low contents of water.
منابع مشابه
Application of Homotopy Perturbation Method to One-dimensional Transient Single-phase EM Heating Model
Thermal recovery involves well-known processes such as steam injection (cyclic steam stimulation, steam drive, and steam-assisted gravity drainage), in situ combustion, and a more recent technique that consists of heating the reservoir with electrical energy. When high frequency is used for heating, it is called electromagnetic (EM) heating. The applications of EM heating for heavy-oil reservoi...
متن کاملWide-band Rock and Ore Samples Complex Permittivity Measurement
Ground penetrating radar (GPR) is based on high-frequency electromagnetic wave propagation and its detecting targets are below the ground surface (Daniels, 2004; Jol, 2009). Velocity and attenuation are two important factors describing the electromagnetic wave in the media composed of rocks or soils. Velocity is inverse proportional to the root of the permittivity while other parameters are fix...
متن کاملModeling Control over Determination of Dielectric Properties by the Perturbation Technique
An accompanying numerical simulation for obtaining field patterns, resonant frequencies, and the Q factor is proposed to evaluate the experimental conditions of complex permittivity reconstruction by the perturbation method and thereby improve its accuracy and flexibility. This approach is illustrated by analyzing the measurement of dielectric constant and the loss tangent of wet movie film in ...
متن کاملMicrowave cavity perturbation studies on H-form and ion- exchanged SCR catalyst materials: correlation of ammonia storage and dielectric properties
Ammonia-based selective catalytic reduction (SCR) has become the major control strategy for NOx emissions from light and heavy duty diesel engines. Before reducing NOx on the SCR active material, ammonia storage on the active sites of the catalyst is crucial. The in operando measurement of the dielectric properties of the catalyst material using microwave cavity perturbation is a promising indi...
متن کاملThe microwave cavity perturbation technique for contact-free and in situ electrical conductivity measurements in catalysis and materials science.
We have developed a noncontact method to probe the electrical conductivity and complex permittivity of single and polycrystalline samples in a flow-through reactor in the temperature range of 20-500 °C and in various gas atmospheres. The method is based on the microwave cavity perturbation technique and allows the simultaneous measurement of microwave conductivity, permittivity and of the catal...
متن کامل