Computational Fluid Dynamics Analysis of Two-Phase Flow in a Packed Bed Reactor
نویسندگان
چکیده
Multiphase catalytic reactions are prominent in chemical engineering; however it is difficult to achieve efficient reactions. Computational fluid dynamics (CFD) software simulates fluid flow so interactions between phases may be analyzed and improved. This project included use of CFD to simulate an experiment on multiphase flow to compare results on flow regime and pressure drop. Results include discussion of the program's capabilities for conducting this analysis and comparison of simulated flow parameters against experimentally determined values.
منابع مشابه
CFD-Calculation of Fluid Flow in a
An accurate description of the fluid flow and heat transfer within a Pressurized Water Reactor (PWR), for the safety analysis and reactor performance is always desirable. In this paper a mathematical model of the fundamental physical phenomena which are associated to a typical PWR is presented. The mathematical model governs the fluid dynamics in the reactor. Using commercial software CFX, a co...
متن کاملNumerical simulation of effect of non-spherical particle shape and bed size on hydrodynamics of packed beds
Fluid flow has a fundamental role in the performance of packed bed reactors. Some related issues, such as pressure drop, are strongly affected by porosity, so non-spherical particles are used in industry for enhancement or creation of the desired porosity. In this study, the effects of particle shape, size, and porosity of the bed on the hydrodynamics of packed beds are investigated with three ...
متن کاملNumerical Simulation of the Hydrodynamics of a Two-Dimensional Gas—Solid Fluidized Bed by New Finite Volume Based Finite Element Method
n this work, computational fluid dynamics of the flow behavior in a cold flow of fluidized bed is studied. An improved finite volume based finite element method has been introduced to solve the two-phase gas/solid flow hydrodynamic equations. This method uses a collocated grid, where all variables are located at the nodal points. The fluid dynamic model for gas/solid two-phase flow is based on ...
متن کاملWall-to-fluid Heat Transfer in a Catalytic Reactor at Supercritical Conditions
Computational fluid dynamics (CFD) studies can be used for improving the understanding of fluid flow and heat transfer in packed bed systems. The objective of this work was to study the heat effects in packed bed reactor under supercritical conditions using CFD comparing the simulations with empirical correlations. Simulations were done for a geometrical model of packed bed of cylindrical catal...
متن کاملImprovement of Hydrodynamics Performance of Naphtha Catalytic Reforming Reactors Using CFD
Due to high applicability of the fixed bed catalytic naphtha reforming reactors, hydrodynamic features of this kind of reactors with radial flow pattern are improved in this work by utilising computational fluid dynamics technique. Effects of catalytic bed porosity, inlet flow rate and flow regime through the bed on the flow distribution within the system are investigated.It is found that t...
متن کامل