Design of a Transverse Flux Linear Motor
نویسندگان
چکیده
This paper presents design procedures of a transverse flux linear motor (TFLM). The minimum and maximum flux linkage was determined by the simplified equivalent magnetic circuit and estimated average magnetic flux density at the air gap region by considering the shape of applied magnetomotive force (MMF). With this information, the number of turns of each phase winding was calculated based on the amplitude of applied voltage and speed of a mover. The rated current, coil diameter, and winding area were obtained with the aid of an empirical formula for determining the required MMF. The usefulness of the proposed design method for TFLM is verified by the three-dimensional equivalent magnetic circuit network (EMCN) method and the experimental results of prototyped machine.
منابع مشابه
C.a.d. of Linear Transverse Flux Motors
In this paper a new structure of the linear transverse flux machine will be presented. It is a combination of a hybrid linear stepper motor and of a linear transverse flux machine with permanent magnets. The design algorithm of the proposed structure will be presented in detail. Upon this algorithm a motor required by a specific application was designed. Several programming packages were used d...
متن کاملOptimum design of a double-sided permanent magnet linear synchronous motor to minimize the detent force
In the permanent magnet linear synchronous motor (PMLSM), force ripple is harmful, useless and disturbing. The force ripple is basically composed of two components: detent force and mutual force ripple. This force is influenced by the geometric parameters of the permanent magnet (PM) motors; such as width, thickness and length of the magnet poles, length and thickness of the rotor and stato...
متن کاملOptimum design of a double-sided permanent magnet linear synchronous motor to minimize the detent force
In the permanent magnet linear synchronous motor (PMLSM), force ripple is harmful, useless and disturbing. The force ripple is basically composed of two components: detent force and mutual force ripple. This force is influenced by the geometric parameters of the permanent magnet (PM) motors; such as width, thickness and length of the magnet poles, length and thickness of the rotor and stato...
متن کاملLinear Transverse Flux Reluctance Machine with Permanent Magnets
A new structure of linear transverse flux machine (TFM) is presented in this paper. It is in fact a variable reluctance linear machine having permanent magnets on the mover. Its structure and its working principle will be discussed. After a preliminary design of the motor a 3D FEM analysis was carried out before optimizing the designed linear motor. The flux densities in the machine and the sta...
متن کاملMulti-level Thrust Ripples Minimization of Linear Flux Switching Motors With Segmented Secondary by Combined Genetic Algorithm and Response Surface Methodology
Linear flux switching motors with simple passive segmented secondary, referred as Segmented Secondary Linear Flux Switching Motors (SSLFSMs), have low cost secondary and therefore are applicable to transportation systems like Maglev. However, it is shown that the SSLFSMs suffer from high thrust ripples. In this paper, minimizing SSLFSM thrust ripples besides maximizing its developed thrust are ...
متن کامل