Optimum Coasting Flight in a Horizontal Plane
نویسنده
چکیده
Busemann's concept of optimum altitude for rectilinear coasting flight has been extended to flight in a horizontal plane. The reachable domain of a vehicle in coasting flight in a horizontal plane, starting from an initial velocity, is obtained. It is shown that the area covered first increases with the altitude and then decreases to zero when the ceiling is reached. In particular, there exists an altitude for maximum longitudinal range and another altitude for maximum lateral range. Optimum variations in the lift coefficient and the bank angle to reach the boundary of the footprint are discussed.
منابع مشابه
A Novel Method for Ultrasonic Evaluation of Horizontal Defects Using Time-of-Flight Diffraction
Time-of-flight diffraction method (ToFD) is an amplitude-independent sizing method which is based on the measurement of time-of-flight of defect tip diffracted waves. Although ToFD can measure through-wall length of defect accurately, this method is not capable of measuring horizontal defect size. In this paper, a new ToFD method for evaluating horizontal planar defects is presented. The finite...
متن کاملPharmacology of motion sickness.
Clinical trials of drugs are either operational conditions, parabolic flight. or rotation in a laboratory setting. Operational conditions include aerobatic flight. cruising small craft into ocean swells. transatlantic crossin~ by ship. OJ" maritime oreration~ Paraholic nighl descrihe~ 2( parabolas With g forcc~ i rom () let ] .S .. ~. common end point in sue\"' stLlcIie~ i '. \'(1m itin~ ~alo ...
متن کاملOptimal Trajectories for Gliding in a Horizontal Plane
This paper presents the optimal solutions to the maximum endurance subsonic by the application of Pontryagin's maximum principle. The gliding vehicle is assumed to be carried by an aeroplane which has a velocity vector heading along the line connecting aeroplane and target. Then at a certain point when the aeroplane is approaching, directly above, or leaving the target, the vehicle is released....
متن کاملOptimal Plane Change During Constant Altitude Hypersonic Flight
In a previous paper, we addressed the problem of choosing constant values of altitude, speed, and angle of attack such that the orbital plane change during hypersonic flight is maximized for a fixed amount of propellant consumption. In the present paper, the restrictions of constant speed and angle of attack are removed. Necessary conditions for solutions to the resulting optimal control proble...
متن کاملThe Effect of Fault Plane on the Horizontal In Situ Stresses Orientation: a Case Study in one of Iranian Oilfield
Knowledge of the orientation of horizontal in situ stresses is important to some areas of oil and gas field development plans. Borehole breakouts observed in image logs and drilling-induced fractures are the main parameters for the determination of the stresses’ directions in situ. In this work, the orientations of borehole breakouts were investigated as a function of depth in oil wells A and ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2004