Comprehensive Modulation and Classification of Faults and Analysis Their Effect in DC Side of Photovoltaic System
نویسندگان
چکیده
The first step in automatic supervision, condition monitoring and fault detection of photovoltaic system is recognition, exploration and classification of all possible faults that maybe happen in the system. This paper aims to perceive, classified, simulate and discus all electrical faults in DC side of photovoltaic system, regarding electrical voltage and current inspections. For that, simplified hybrid model of photovoltaic panel in MATLAB environment is used. Investigation and classification of each type of faults is down and the effects of the faults are illustrated in this paper. Flash test are applied to improved electrical model. Current-Voltage curves signature are interpreted and investigated in simulation environment.
منابع مشابه
DC Microgrid Protection in the Presence of the Photovoltaic and Energy Storage Systems
In recent years, most of the loads and distributed generations are connected to the AC grid through the power electronic converters. Using the DC grid beside the AC grid can reduce the conversion stages and power losses. Protection of the DC grids is a challenging issue because of the new structures of DC grids and fast transients of the DC faults. This paper studies the protection of the low v...
متن کاملA Modified Phase-Shifted Pulse Width Modulation to Extend Linear Operation of Hybrid Modular Multi-level Converter
Recently, hybrid modular multi-level converters, which are configured as full and half bridge sub-modules, are developed and utilized in the wide area of applications. Compared to its non-hybrid counterpart, these converters have several advantages such as the ability to nullify the DC side fault current and controlling AC side reactive power during the faults. This paper proposes a modified ph...
متن کاملHigh gain multi-input DC-DC converter with combined phase-shift/PWM modulation for stand-alone applications
The existence of unreliable renewable energy resources would be required to use energy resources and storage units simultaneously, particularly in applications such as electrical vehicles and stand-alone energy supplying systems. The objective of this paper is to introduce a new topology of multi input converter in hybrid power supply system of photovoltaic, fuel cell and battery for medium pow...
متن کاملتشخیص و کلاسه بندی برخط خطا در یک مزرعه خورشیدی با استفاده از روش بیزین و k نزدیک ترین همسایه
Nowadays, Distributed Generation (DG), especially PV systems as a new source of power absorbed a high percentage of investment. Fault Detection and analysis in solar photovoltaic (PV) arrays are important issues to increase reliability, efficiency and safety in PV arrays. Due to PV’s non-linear characteristics, current-limiting nature, high fault impedances, low irradiance condi...
متن کاملIncreasing Voltage Gain by New Structure of Inductive Switching DC-DC Converter
In a photovoltaic system, sun light energy is converted to electricity. The generatedelectricity has a low DC voltage. In order to increase voltage generated by photovoltaic cells (PV),an additive DC-DC converter is required to raise the low voltage to a good level which provides theconditions for connection to DC-DC converters. Low wastes, low costs, and high efficiency are someother specifica...
متن کامل