Preparation and Characterization of Continuous Fe-Containing Silicon Carbide Radar Absorbing Fibers from Precursor-Based Processing
نویسندگان
چکیده
A new polymer polyferrocarbosilane (PFCS) was synthesized using polydimethylsilane and ferrocene as the raw materials. The polymer was then melt-spun into continuous PFCS fibers, cured in air and heat-treated in a nitrogen atmosphere up to 1300 , a kind of Fe-containing SiC fibers were finally obtained. The SiC(Fe) ceramic fibers were combined with epoxy resin and a structural material was prepared showing excellent radar absorbing properties. HRTEM, XRD and XPS were used to characterize the SiC(Fe) fibers. The results show that the fibers are composed of -SiC, amorphous SiCxO4-x, free carbon and small amount of Fe3Si-like microcrystals. A carbon-enriched layer of about 120nm was formed on the surface of the fibers.
منابع مشابه
Simple Method for the Preparation of Fe3O4/MWCNT Nanohybrid as Radar Absorbing Material (RAM)
We have successfully prepared Fe3O4/MWCNT nanohybrid with a very simple and economical method. Multi-Walled Carbon NanoTubes (MWCNT) encapsulated with Fe3O4 nanoparticles were synthesized via pyrolyzing of ferrocene. The sample was characterized with XRD, TEM and Vibrating Sample Magnetometer (VSM). Also, Permeability (µ) and Permittivity (ε) were...
متن کاملPreparation and Characterization of Axial Gradient Silicon Carbide Fibers with Sinusoidal Electrical Resistivity
Two types of silicon carbide fibers with sinusoidal electrical resistivity were prepared by using different pyrolysis technology. The relationship between the microstructure and the electrical resistivity of these fibers was investigated and compared. The results indicated that carbon layer was the main conductive phase in the SiC fibers obtained by means of one step pyrolysis, whereas a free c...
متن کاملInvestigation on magnetic and microwave behavior of magnetite nanoparticles coated carbon fibers composite
Radar absorbing materials, i.e. magnetite (Fe3O4) coated carbon fibers (MCCFs) were fabricated by electro-deposition technique. Black-colored single spinel phase Fe3O4 nanoparticles was easily synthesized by hydrothermal method using reduction of a Fe (III) - Triethanolamine complex in an aqueous alkaline solution at 60-80 ◦C. Uniform and compact Fe3O4 films were fabricated on nitric acid treat...
متن کاملImproving Radar Absorbing Capability of Polystyrene Nanocomposites: Preparation and Investigation of Microwave Absorbing Properties
Microwave absorbing materials are usually designed to solve protection against electromagnetic interference in wireless communication systems and high frequency circuit mechanisms. In this research polystyrene (PS) nanocomposites containing various nano-fillers were successfully synthesized. The novelty of this work is comparing of three various nanostructures: non-metallic conductive graphene ...
متن کاملEffect of Varying Silicon Carbide Particulate on the Mechanical Properties of Aluminium Based Alloy Automobile Brake Disc Component
In the current study, effect of varying Silicon Carbide particulate on the mechanical properties of Aluminium based alloy automobile brake disc component was investigated. The result of experimental investigation on mechanical properties of Silicon Carbide particle reinforced Aluminium Matrix was achieved for composite brake disc using universal tensile test machine, Rockwell hardness testing m...
متن کامل