The Equation of the Contact Line of the Involute Curvilinear-Tooth Cylindrical Gear Pump for the Agricultural Tractor
نویسندگان
چکیده
In order to derive the equation of the contact line of the involute curvilinear-tooth cylindrical gear pump for the agricultural tractor, the tooth surface of the involute curvilinear-tooth cylindrical gear is firstly generated as that of the spur or helical gear. Then the equation of the tooth surface is derived from changing the settings and orientations of the coordinate systems after the equation of the tooth profile in an arbitrary radial section is calculated by the methods of differential geometry. Based on the equation of the tooth surface, the meshing equation of the two gears is further acquired and then the equation of the contact line. Finally, the tooth surface and the contact line are simulated with mathematical software. The results suggests that the contact line between two curvilinear-tooth cylindrical gears is an arc line in the surface of action; and this line, shaped as an arc line in the generating plane of the tooth surface, is longer than that of the spur or helical gear with the same face width.
منابع مشابه
Sliding Friction Contact Stiffness Model of Involute Arc Cylindrical Gear Based on Fractal Theory
Gear’s normal contact stiffness played an important role in the mechanical equipment. In this paper, the M-B fractal model is modified and the contact surface coefficient is put forward to set up the fractal model, considering the influence of friction, which could be used to calculate accurately the involute arc cylindrical gears’ normal contact stiffness based on the fractal theory and Hertz ...
متن کاملOptimization Gear Oil Pump in Order to Energy Saving and Environmental Impact in a Diesel Engine
Oil pump in diesel engine has significant effect on energy consumption and environment pollution. In this paper, the modeling and simulation of a gear oil pump used in a diesel engine and its fluid flow analysis by a solver has been explained. Also the optimization and redesign of it has been discussed and then the outcomes have been compared with the experimental and previous results. The t...
متن کاملDynamic Meshing Characteristics of Elliptic Cylinder Gear Based on Tooth Contact Analysis
As the most important working area of gear, teeth play the role of transmitting load and power. Tooth line and tooth profile are the two main characteristics of the tooth surface, which affect the shape of the tooth surface, tooth meshing characteristics and contact characteristics. Taking the elliptical cylinder gear pair in the reversing device of a new type of drum pumping unit as the resear...
متن کاملGeometry Definition and Contact Analysis of Spherical Involute Straight Bevel Gears
A practical application of the spherical involute surface to the forged straight bevel gears is provided and demonstrated in this work. Conjugate (pure involute) theoretical surfaces are developed from the input design parameters. The surfaces are modified to suit the actual application (automotive differential). The unloaded (or low load) tooth contact analysis of modified surfaces is performe...
متن کاملInfluence of Addendum Modification Factor on Root Stresses in Normal Contact Ratio Asymmetric Spur Gears
Tooth root crack is considered as one of the crucial causes of failure in the gearing system and it occurs at the tooth root due to an excessive bending stress developed in the root region. The modern power transmission gear drives demand high bending load capacity, increased contact load capacity, low weight, reduced noise and longer life. These subsequent conditions are satisfied by the aid o...
متن کامل