SOC-Based Sensor Mote Design

نویسنده

  • Ali Elkateeb
چکیده

In this paper, a development of sensor node for environment monitoring is described. The Reconfigurable System-On-chip (RSOC) technology is used to integrate the node’s main components on FieldProgrammable Gate Array (FPGA) chip. The main components required to support the environmental applications such as pixels sensor, reconfigurable processing core, and a tiny solar unit for recharging node’s battery, are implemented on the node. The use of FPGA chips has made such nodes consume large power. Therefore, nodes are provided with tiny rechargeable unit to recharge the nodes’ batteries. The nodes should be installed at well-setting environmental applications, where nodes are carefully distributed over the environmental applications field to be exposed to daylight, which will help recharge nodes’ batteries. Applications such as border control and forest fire monitoring can use such nodes at their wireless sensor networks.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

CESEL: Securing a Mote for 20 Years

Embedded wireless sensors, once deployed, may remain in active use for decades. At the same time, as motes come to dominate both the number of hosts and data traffic of the Internet, their security will become fundamental to general Internet security. This paper argues that the next generation of embedded networked sensor devices (“motes”) should consider this tension in their basic design and ...

متن کامل

Sandwich Node Architecture for Agile Wireless Sensor Networks for Real-time Structural Health Monitoring Applications

In recent years, wireless sensor network (WSN), as a powerful tool, has been widely applied to structural health monitoring (SHM) due to its low cost of deployment. Several commercial hardware platforms of wireless sensor networks (WSN) have been developed and used for structural monitoring applications [1,2]. A typical design of a node includes a sensor board and a mote connected to it. Sensin...

متن کامل

Wireless Sensor Network Deployment for Building Environmental Monitoring and Control

It is commonly agreed that a 15-40% reduction of building energy consumption is achievable by efficiently operated buildings when compared with typical practice. Existing research has identified that the level of information available to Building Managers with existing Building Management Systems and Environmental Monitoring Systems (BMS/EMS) is insufficient to perform the required performance ...

متن کامل

Energy Harvesting for Practical Deployment of Wireless Sensor Networks in Building Energy Management (BEM) Applications

The Tyndall Mote is a technology platform for research activities in Wireless Sensor Networks (WSN). BEM is one of the major application areas as it has been demonstrated that energy effic iency savings of up to 1520% are possible by using WSN technology in smart build ing applications [1]. The current mote design offers a modular, flexible and stackable solution. But for next generation design...

متن کامل

A REACH-Mote: A Range Extending Passive Wake-up Wireless Sensor Node

A wireless sensor network that employs passive radio wake-up of the sensor nodes can reduce the energy cost for unnecessary idle listening and communication overhead, extending the network lifetime. A passive wake-up radio is powered by the electromagnetic waves transmitted by a wake-up transmitter rather than a battery on the sensor node. However, this method of powering the wake-up radio resu...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2013