Aided Runner and Gating System Design from
نویسندگان
چکیده
important activities of die-casting die design. In normal practice, determine therunner and gating designparameters. These parameters are simulations on a computer and dry runs on adie-casting machine These iterative activities increase the manufacturing lead time and makes A system which could reduce the iterations and make the presentsa computer-aided system for runner and gating system generates runner and gating system parameters based on a runner and gating system feature library that has been built in this ,along the parting line for some industrial die-casting parts are as per the practices being followed Runner, Gating System Design.
منابع مشابه
The Effects of Gating Systems on the Soundness of Lost Foam Casting (LFC) Process of Al-Si Alloy (A.413.0)
The effects of gating systems, number of runner, and their locations, in the Lost Foam Casting (LFC) of Aluminum alloy (A.413.0) were investigated. Six different gating systems, with one or two running systems were designed. X-ray radiography and the three axis-bending tests have been employed to evaluate the casting soundness and quality. The results revealed that gating systems have a major e...
متن کاملMOLD FILLING BEHAVIOR OF DOUBLE GATING SYSTEM IN ALUMINUMLFC PROCESS
The mold-filling behavior in the casting of aluminum alloy (A413) using lost foam casting (LFC) was explored. The effects of gate numbers, type of gating and casting thickness on the filling behavior were evaluated. Although, unlike convectional casting process, the gating system showed little effect onfilling ability, casting thickness created a greater effect on the mold filling. In contrast ...
متن کاملNumerical Investigation on the Effect of Mold Design on Shrinkage of Sand Casted Multistage BB3-6×6 Pump Casing (RESEARCH NOTE)
Design and manufacturing technology of high pressure multistage pumps which are commonly utilized in oil and gas industries, used to be imported from foreign companies. Due to international sanctions against I. R. Iran, it started to be designed and launched domestically. Nowadays all production lines including design, manufacturing and testing of these pumps have been performed by Iranian expe...
متن کاملKnowledge – based method for gate and cold runner definition in injection mold design
The quantity of plastic parts in mechanical and electronic industry during past 2-3 decades has a tendency to grow up. Mechatronics systems, in particular, apply many parts of plastic materials. A plastic, which is one of the most versatile materials in the modern age, is widely used because this is an easiest way to get parts of complicated geometrical form and properties. The injection moldin...
متن کاملArchitectural-Level Power Optimization of Microcontroller Cores in Embedded Systems
Power saving is becoming one of the major design drivers in electronic systems embedding microcontroller cores. Known microcontrollers typically save power at the expense of reduced computational capability. With reference to an 8051 core, this paper presents a novel clustered clock gating to increase power efficiency at architectural level without performance loss and preserving the reusabilit...
متن کامل