Experimental Studies on the Mechanical Property of Laminated Bamboo in Thailand
نویسندگان
چکیده
A new generation product made from bamboo strips, known as laminated bamboo, has gained importance. The objective of this research was to experiment the effect of three factors on the mechanical property of laminated bamboo. The interested factors for experimental design were (A) four bamboo species, namely Bambusa blumeana Schultes (Pai See Suk), Dendrocalamus asper Backer (Pai Tong), Dendrocalamus hamiltonii Nees (Pai Hok) and Dendrocalamus sericeus Munro (Pai Sang Mon), (B) two types of glue adhesive, polyvinyl acetate emulsion (PVAC) fortified with urea-formaldehyde (UF) and urea-formaldehyde (UF) to make parallel-oriented bamboo strips laminates and (C) glue weight per strip area, 150 g/m and 190 g/m. Experimental results showed that Dendrocalamus asper Backer (Pai Tong) and Dendrocalamus sericeus Munro (Pai Sang Mon) were best used for manufacturing due to their highest MOR and MOE. The amount of glue weight 150 g/m yielded higher MOR and MOE than the amount of glue weight 190 g/m. At the conclusion, the laminated bamboo manufacturers can benefit from this research in order to select right materials according to strength, cost and accessibility. Keywords—Laminated Bamboo, Mechanical Property, 3-Way ANOVA.
منابع مشابه
Development of Laminated Bamboo Lumber: Review of Processing, Performance, and Economical Considerations
As focus is drawn toward more sustainable construction practices, use of bamboo as a structural building material is growing as a topic of interest. It is highly renewable, has low-embodied energy, and has the highest strength-to-weight ratio of steel, concrete, and timber. Composite lumber made from bamboo, termed laminated bamboo lumber (LBL), has gained the particular interest of researchers...
متن کاملEvaluation of the Performance of the Composite Bamboo/Epoxy Laminated Material for Wind Turbine Blades Technology
Global energy sources such as coal and oil are limited, and the burning of such fossil resources creates pollution problems. Wind energy offers one of several promising clean alternatives to carbon-based fuels. However, the composite materials currently available for producing wind turbine blades cannot accommodate the scale-up of wind energy due to their high price and disposal challenges (e.g...
متن کاملPhysical and Mechanical Properties of Particleboard from Bamboo Waste
This research was to evaluate a technical feasibility of making single-layer experimental particleboard panels from bamboo waste (Dendrocalamus asper Backer) by converting bamboo into strips, which are used to make laminated bamboo furniture. Variable factors were density (600, 700 and 800 kg/m) and temperature of condition (25, 40 and 55 C). The experimental panels were tested for their physic...
متن کاملThe structure and mechanics of Moso bamboo material Citation
Although bamboo has been used structurally for millennia, there is currently increasing interest in the development of renewable and sustainable structural bamboo products. These structural bamboo products are analogous to wood products such as plywood, oriented strand board and glue-laminated wood. In this study, the properties of natural Moso bamboo (Phyllostachys pubescens) are investigated ...
متن کاملResearch and Development on Bamboo Reinforced Concrete Structure
ABSTRUCT: Recently, in the attention in response to global warming issues and sustainable society, the manufacturing using natural materials has become actively. Bamboo, low cost, fast growing, and broad distribution of growth, is expected to contribute significantly to earthquake-resistant construction and seismic retrofit technology in the developing countries. The authors also have been stud...
متن کامل