Mobility and coalescence of stacking fault tetrahedra in Cu
نویسندگان
چکیده
Stacking fault tetrahedra (SFTs) are ubiquitous defects in face-centered cubic metals. They are produced during cold work plastic deformation, quenching experiments or under irradiation. From a dislocation point of view, the SFTs are comprised of a set of stair-rod dislocations at the (110) edges of a tetrahedron bounding triangular stacking faults. These defects are extremely stable, increasing their energetic stability as they grow in size. At the sizes visible within transmission electron microscope they appear nearly immobile. Contrary to common belief, we show in this report, using a combination of molecular dynamics and temperature accelerated dynamics, how small SFTs can diffuse by temporarily disrupting their structure through activated thermal events. More over, we demonstrate that the diffusivity of defective SFTs is several orders of magnitude higher than perfect SFTs, and can be even higher than isolated vacancies. Finally, we show how SFTs can coalesce, forming a larger defect in what is a new mechanism for the growth of these omnipresent defects.
منابع مشابه
Atomic-scale dynamic process of deformation-induced stacking fault tetrahedra in gold nanocrystals.
Stacking fault tetrahedra, the three-dimensional crystalline defects bounded by stacking faults and stair-rod dislocations, are often observed in quenched or irradiated face-centred cubic metals and alloys. All of the stacking fault tetrahedra experimentally observed to date are believed to originate from vacancies. Here we report, in contrast to the classical vacancy-originated ones, a new kin...
متن کاملObservation of Stacking Fault Tetrahedral in TWIP Steel
Low stacking fault energy face centered cubic (FCC) materials contain characteristic defect structures. Stacking fault tetrahedral are one of those rare structures that occur under special experimental conditions. For the first time, stacking fault tetrahedral were observed in Fe-30Mn-3Al-3Si twinning induced plasticity (TWIP) steel. Their presence resulted from a quenching heat treatment.
متن کاملStacking-fault energies for Ag, Cu, and Ni from empirical tight-binding potentials
The intrinsic stacking-fault energies and free energies for Ag, Cu, and Ni are derived from molecular-dynamics simulations using the empirical tight-binding potentials of Cleri and Rosato [Phys. Rev. B 48, 22 (1993)]. While the results show significant deviations from experimental data, the general trend between the elements remains correct. This allows to use the potentials for qualitative com...
متن کاملGrowth of large-scale nanotwinned Cu nanowire arrays from anodic aluminum oxide membrane by electrochemical deposition process: controllable nanotwin density and growth orientation with enhanced electrical endurance performance.
Densely nanotwinned Cu nanowire (NW) arrays with an identical diameter of ∼55 nm were fabricated by pulse electrochemical deposition at low temperature using anodic aluminum oxide as a template. Different growth orientations of nanotwinned Cu nanowire arrays were investigated. The endurance of the electrical current density before breakdown of the nanotwinned Cu NWs can reach up to 2.4 × 10(8) ...
متن کاملAnalytical and numerical determination of the elastic interaction energy between glissile dislocations and stacking fault tetrahedra in FCC metals
Understanding flow localization in materials containing high concentrations of Stacking Fault Tetrahedra (SFT’s) depends on delineation of the mechanisms by which they are destroyed as effective dislocation obstacles. The elastic interaction between glissile dislocations and SFT’s in FCC metals is examined, both analytically and numerically. Numerical calculations are performed for both full an...
متن کامل