A time-resolved microwave conductivity study of the optoelectronic processes in TiO2 In2S3 CuInS2 heterojunctions
نویسندگان
چکیده
Photoinduced interfacial charge carrier generation, separation, trapping, and recombination in TiO2 In2S3 CuInS2 cells have been studied with time-resolved microwave conductivity TRMC . Single layer, double layer, and complete triple layer configurations have been studied. Selective electronic excitation in one of the components is accomplished by using monochromatic pulsed laser excitation. In bare CuInS2 films and in TiO2 CuInS2 double layers, photoinduced charge carriers recombine on a subnanosecond time scale. This fast recombination slows down significantly when an In2S3 buffer layer is applied between TiO2 and CuInS2. In that case, the charge separation lifetime increases by more than one order of magnitude. A superlinear dependence of the TRMC signals on the incident laser intensity is observed for the triple layer configuration, which indicates saturation of electron traps in In2S3 or hole traps in CuInS2. Furthermore, TRMC signals from TiO2 In2S3 CuInS2 triple junctions and those from In2S3 CuInS2 double layers are identical, which shows that charge carrier separation exclusively takes place at the In2S3 CuInS2 interface. © 2007 American Institute of Physics. DOI: 10.1063/1.2745386
منابع مشابه
A parametric study of TiO2/CuInS2 nanocomposite solar cells: how cell thickness, buffer layer thickness, and TiO2 particle size affect performance
3D CuInS2/TiO2 nanocomposite solar cell performance is strongly influenced by several structural factors, including cell thickness, buffer layer thickness, and the morphology of the TiO2 nanoparticulate matrix. To delineate the effect of these structural factors on photovoltaic performance, a series of parametric studies are performed where a single structural parameter is varied (TiO2 nanopart...
متن کاملTime-of-flight studies on TiO2/CuInS2 heterojunctions
Time-of-Flight TOF measurements have been performed on n-type TiO2 /p-type CuInS2 heterojunctions. The TiO2 film thickness has been varied between 200 and 400 nm, while the CuInS2 film thickness has been fixed at 500 nm. The TOF response can be accurately modeled, if the potential drop across the p-n heterojunction with a large density of interface states is properly accounted for. Also electro...
متن کاملFolded Nanosheets: A New Mechanism for Nanodisk Formation
Two-dimensional (2D) nanostructures have generated significant interest in the scientific community as a result of their high surface area and remarkable optoelectronic properties. In this work, we present a simple colloidal synthesis for ultrathin nanosheets of both In2S3 and CuInS2. Contradictory phase designations exist for In2S3 at the nanoscale as a result of overlapping reflections from m...
متن کاملCuInS2 quantum dot-sensitized TiO2 nanorod array photoelectrodes: synthesis and performance optimization
CuInS2 quantum dots (QDs) were deposited onto TiO2 nanorod arrays for different cycles by using successive ionic layer adsorption and reaction (SILAR) method. The effect of SILAR cycles on the light absorption and photoelectrochemical properties of the sensitized photoelectrodes was studied. With optimization of CuInS2 SILAR cycles and introduction of In2S3 buffer layer, quantum dot-sensitized ...
متن کاملThe synergy between Ti species and g-C3N4 by doping and hybridization for the enhancement of photocatalytic H2 evolution.
A Ti species modified g-C3N4 photocatalyst was synthesized via an in situ hydrothermal route and the subsequent low-temperature calcination. The hydrothermal process results in not only the fabrication of TiO2/g-C3N4 heterojunctions, but also the coordination between Ti species and g-C3N4, which are verified by X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). The electrical r...
متن کامل