Optimal Design and Evaluation of a Ring-die Granulator for Straws
نویسندگان
چکیده
This research provides an optimal design of structural parameters for ring-die granulators used in the cool briquetting process. Experimental research on the briquetting rate of pellets was carried out for three kinds of crop straws with different granularities, moisture ratios, and lengthdiameter ratios of the die hole. Results showed that: when the swoop angle β was 45 and the diameter ratio of roller to die was equal to 0.585, the equipment would have higher productivity and lower die-roller contact strength, yielding a good comprehensive briquetting effect; when the granularity was 4mm, the moisture ratio was 16% and the lengthdiameter ratio was 5.2, the equipment would ensure a higher briquetting rate of pellets and the lowest power consumption per ton of material, yielding the best briquetting effect. This provides references for structural design and process parameters selection of ring-die granulators.
منابع مشابه
Evaluation of Serial Thawing-Refreezing on Human Spermatozoa Resistance Using Cryovials and Straws
متن کامل
Simulation of a New Process Design to Fabricate a Rectangular Twist Waveguide Using Extrusion and a Twist Die
The aim of the present study is to determine the feasibility of making a rectangular twist waveguide used to rotate electromagnetic waves. For this purpose, the process of fabricating an aluminum rectangular twist waveguide was simulated by making use of finite element method and Deform software. The optimum length and angle of the twist die for manufacturing a twist waveguide with inner cross ...
متن کاملOptimum Die Design in Drawing of Square Section Rod from Round Bar
Drawing of square section rod from round bar can be done with two die shapes. In the first die shape, deformation starts from corners of the square and in second die shape, deformation starts from sides of square. This article has compared the drawing force for both die shapes and as a result optimum die shape was determined. Due to complexity of metal flow inside the die, analyzing of actual p...
متن کاملDesign, Synthesis and Biological Evaluation of 5-Oxo-1,4,5,6,7,8 Hexahydroquinoline Derivatives as Selective Cyclooxygenase-2 Inhibitors
A group of regioisomeric 5-oxo-1,4,5,6,7,8 hexahydroquinoline derivatives possessing a COX-2 SO2Me pharmacophore at the para position of the C-2 or C-4 phenyl ring, in conjunction with a C-4 or C-2 phenyl (4-H) or substituted-phenyl ring (4-F,4-Cl,4-Br,4-OMe,4-Me, 4-NO2), were designed for evaluation as selective cyclooxygenase-2 (COX-2) inhibitors. These target 5-oxo-1,4,5,6,7,8 hexahydroquino...
متن کاملAnalysis of Grading Ring Design Parameters and Heat Sink Numbers Effect on Voltage Distribution and Leakage Current in Metal Oxide Surge Arrester
Metal oxide surge arresters (ZNO) are used widely in power system to protect equipments from over voltages. Non uniform potential distribution leads to the depressed service life and low safe reliability, so grading ring is applied on HV surge arrester order to uniform the electric field distribution. One of the problems of arresters is leakage current in power frequency that different paramet...
متن کامل