Do human osteoblasts grow into open-porous titanium?

نویسندگان

  • U Müller
  • T Imwinkelried
  • M Horst
  • M Sievers
  • U Graf-Hausner
چکیده

A titanium foam for spine fusion and other applications was tested by cell culture. Its high porosity and surface roughness should enable bone cells to grow through it, resulting in a better fixation of the vertebral body. The foam was tested by in vitro experiments with human osteoblasts under static culture conditions and in a perfused system. By means of cell number, viability, scanning electron microscopy and histological staining, cell proliferation could be observed. The expression of osteogenic genes like collagen-I, alkaline phosphatase and osteocalcin was proven by reverse transcription polymerase chain reaction (RT-PCR) as well as in the case of alkaline phosphatase with biochemical methods. The conducted experiments showed that human osteoblasts could grow through the interconnected porosity of the metal foam and that they expressed an osteoblast like phenotype. The results suggest that in vivo osteoblasts are likely to form a trabecular bone bridge through this titanium foam. Consequently, with this osteoconductive material, there may be a reduced need for autologous bone in spinal fusion procedures.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Enhanced extracellular matrix production and mineralization by osteoblasts cultured on titanium surfaces in vitro.

Long-term stability of orthopaedic and dental implants depends on the integration of the artificial material into the surrounding bone tissue. The physical and chemical properties of implants, including those made of metals such as titanium, are thought to influence osseointegration. Despite the known importance of this interface, little is known about the factors that promote its formation. In...

متن کامل

Poly-ε-caprolactone Coated and Functionalized Porous Titanium and Magnesium Implants for Enhancing Angiogenesis in Critically Sized Bone Defects

For healing of critically sized bone defects, biocompatible and angiogenesis supporting implants are favorable. Murine osteoblasts showed equal proliferation behavior on the polymers poly-ε-caprolactone (PCL) and poly-(3-hydroxybutyrate)/poly-(4-hydroxybutyrate) (P(3HB)/P(4HB)). As vitality was significantly better for PCL, it was chosen as a suitable coating material for further experiments. T...

متن کامل

Synthetic osteogenic extracellular matrix formed by coated silicon dioxide nanosprings

BACKGROUND The design of biomimetic materials that parallel the morphology and biology of extracellular matrixes is key to the ability to grow functional tissues in vitro and to enhance the integration of biomaterial implants into existing tissues in vivo. Special attention has been put into mimicking the nanostructures of the extracellular matrix of bone, as there is a need to find biomaterial...

متن کامل

Titanium with aligned, elongated pores for orthopedic tissue engineering applications.

Porous titanium with elongated and aligned pores, mimicking the anisotropic structure of bone, was created by solid-state expansion of argon trapped in elongated pores between titanium wires. Both elastic moduli and yield strengths are larger in the longitudinal direction (E = 51 GPa, sigma y = 338 MPa) than in the transverse direction (E = 41 GPa, sigma y = 267 MPa). Finite-element analysis of...

متن کامل

Comparison of Selective Laser Melted Titanium and Magnesium Implants Coated with PCL

Degradable implant material for bone remodeling that corresponds to the physiological stability of bone has still not been developed. Promising degradable materials with good mechanical properties are magnesium and magnesium alloys. However, excessive gas production due to corrosion can lower the biocompatibility. In the present study we used the polymer coating polycaprolactone (PCL), intended...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • European cells & materials

دوره 11  شماره 

صفحات  -

تاریخ انتشار 2006