Modeling of Transient Flow in Plastic Pipes
نویسندگان
چکیده
We present a numerical code for calculating transient flow in plastic pipes, especially in the polyethylene pipe, to analysis water hammer phenomena. The set partial differential equations to be solved is obtained using conservation laws and behavior for the fluid and the pipe wall, associated with constitutive equations of the two media, and relationships compatibility of interfaces on velocities and stresses. Coupling due to Poisson's ratio is also incorporated in this model. A global digital processing is achieved using the method of characteristics. The results obtained are in good agreement with those found in the literature.
منابع مشابه
Added Resistance of an AUV Moving Inside a Water Pipeline Due to Wall Proximity
This paper evaluates the added resistance of a torpedo shape AUV, moving inside a water pipeline, due to wall effects within the tube. Today, there are long length pipelines of water or petroleum that need to regular inspection. Early detection of failure will help to prevent breakdown and avoid the huge cost of an accident. As pipelines are enclosed environments and difficult to access, pipeli...
متن کاملTransient Fluid Flow Modeling in Fractured Aquifer of Sechahoon Iron Mine Using Finite Element Method
Considering the fact that a large volume of iron reserve in the Sechahoon Iron Mine in Yazd Province has located under the water table, it is necessary to conduct a comprehensive study on water flow within the pit and its surroundings. The conceptual model of the aquifer was created using surface and underground geological information compared with water table data of the area of interest. In t...
متن کاملExperimental and Numerical Analysis of Flow and Heat Transfer in a Gas-Liquid Thermosyphon Heat Exchanger in a Pilot Plant
A numerical and experimental investigation of flow and heat transfer in a gas- liquid Thermosyphon Heat Exchanger "THE" with built in heat pipes and aluminum plate fins for moderate Reynolds numbers has been carried out. It's module is composed of 6 rows and 15 columns copper pipes with aluminum plate fins with dimensions of 130cm height, 47cm width and 20cm depth. The tubes have been fill...
متن کاملTHREE DIMENSIONAL MODELING OF TURBULENT FLOW WITH FREE SURFACE IN MOLD FILLING
In the present study a Finite Difference Method has been developed to model the transient incompressible turbulent free surface fluid flow. A single fluid has been selected for modeling of mold filling and The SOLA VOF 3D technique was modified to increase the accuracy of simulation of filling phenomena for shape castings. For modeling the turbulence phenomena k-e standard model was used. In or...
متن کاملNumerical Analysis of the Effect of External Circumferential Cracks in Transition Thickness Zone of Pressurized Pipes Using XFEM – Elastic-Plastic Behavior
The elastic-plastic behavior of the material is considered to analyze the effect of an external circumferential crack on a pipe with thickness transition and double slopes. Using the extended finite element method (XFEM), the J-integral of 3D cracks were investigated and compared between straight pipes and pipes with thickness transition and different slopes. Considering internal press...
متن کامل