Micro-strip Patch Antenna on Glass Proxy Substrate for Infinite and Finite Ground Plane

نویسندگان

  • Samvedna Srivastava
  • Rajeev Kumar Thakur
چکیده

In this paper we have analysed and designed a rectangular microstrip antenna. We analyzed micro strip antenna in IE3D by finite moment of method. In this paper we have compare and analyzed the micro strip antenna in infinite ground plane having dimension length, L = 700mil & width, W=800mil to the micro strip antenna in finite ground plane having dimension length, L = 1468mil & width, W=1568mil. The proposed antenna designs have been analyzed between 1GHz to 10 GHz. When the proposed antenna design on a 59mil GLASS PROXY Substrate of different dimension were examined for the same dielectric constant 4.3, loss tangent .019. At 5GHz the verify and Tested result on IE3D SIMULATOR for infinite ground plane are Return loss = -19dB, VSWR= 1.249. At 2GHz and 6GHz the verify and tested result on IE3D SIMULATOR for finite ground plane are Return loss = -11.81dB and -16dB, VSWR= 1.726 and 1.379. All results shown in Simulation results.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Modified U-Slot Stacked Micro-Strip Patch Antenna for Ultra-Wideband Applications in S Band, C Band and X Band

The U-slot micro-strip patch antennas were originally developed for bandwidth broadening applications. This study presents a transmission line feed to modify the U-slot stacked rectangular micro-strip patch antenna for Ultra-Wide Band (UWB) communications. The modified antenna has a U-cut loaded with parallel slits and corner slots and is printed on a dielectric substrate of FR4 with relative p...

متن کامل

Modified Rectangular Patch Antenna Loaded With Multiple C Slots for Multiple Applications

A new multiple C-slotted microstrip patch antenna is proposed in the present study. A patch antenna is a wide-beam narrowband antenna. The microstrip patch antenna consists of a very thin metallic strip (patch) placed a small fraction of a wavelength above a ground plane. The patch can be designed in any possible shape and normally made of conducting materials such as copper or gold. This study...

متن کامل

A Capacitive Fed Microstrip Patch Antenna with Air Gap for Wideband Applications (RESEARCH NOTE)

In this paper a microstrip antenna on a suspended substrate with capacitive feed is presented. capacitive feed is created by a slot within the rectangular patch around the feed point. The proposed antenna exhibits a much higher impedance bandwidth of about 47% (S11 < −10 dB). Effects of key design parameters such as the air gap between the substrate and the ground plane, the gap width between r...

متن کامل

Gain and Bandwidth of Micro-strip Patch Antenna with Split Ring Resonator (SRR)

This paper present the improvement in gain of micro-strip patch antenna, which is used with Circular, Rectangular and Square shaped split ring resonator designed at a separate substrate at height 0.05mm from the ground plane. In spite of design complexity it is easy and commercially cheap way of enhancing gains of micro-strip antenna. Simulations have been performed using High Frequency Structu...

متن کامل

Numerical Modeling and Experimental Study of Probe-Fed Rectangular Dielectric Resonator Antenna (RDRA) Supported by Finite Circular Ground Plane

Dielectric Resonator Antennas (DRAs) have received increased interest in recent years for their potential applications in microwave and millimeter wave communication systems. DRAs are normally used with the support of a ground plane. The radiation and impedance properties therefore depend not only on their physical dimensions and dielectric properties, but also on the size of the ground plane. ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2012