Simulation of a Tire Inspection System
نویسندگان
چکیده
Simulation is an important aspect to consider when designing an inspection system based upon machine vision. The tire inspection system uses thermal cameras to inspect the surface of a tire. The simulation of a tire inspection system can yield an optimal set of parameters for a thermal camera, or given a specific thermal camera provide information on the optimal placement of the camera. Since the design process takes place by simulation the design can be validated before committing to the expense of new equipment. The simulation can also be used to map acquired thermal data back onto a model of a tire to aid in the inspection process.
منابع مشابه
Analytical Investigation of Tire-Road Contact Characteristics for Wheelchair Robots Safely Running
To effectively improve the tire grounding behaviors of wheelchair robots, an analytical method is proposed to analyze and optimize the tire grounding safety. Firstly, taking the cushion and tires as the vibration isolation elements with stiffness and damping, the vertical vibration model of the human-wheelchair robot is established. Then, taking the random excitation as the typical input, the f...
متن کاملProtective and dosimeter design of the stationary and mobile model truck inspection system with electron linear accelerator radiation source
In this work, calculations of leaked dose from vehicle inspection area, the absorbed dose by driver and operator, and the required concrete thickness for shielding the inspection area are presented using the Monte Carlo code MCNPX2.6. The X-ray source of the present vehicle inspection system is a LinatronMi6 accelerator, end of which has only been simulated in this study (the electron beam coll...
متن کاملFinite Element Analysis for Estimating the Effect of Various Working Conditions on the Temperature Gradients Created Inside a Rolling Tire
Periodic deformation of a tire during its rolling motion causes energy dissipating and heat generation due to hysteretic nature of the rubber. The increase in tire temperature may have disastrous effects on safe service life and safety of vehicles. In this study a numerical simulation based on finite element method is used for evaluating the effect of various working conditions on temperature f...
متن کاملObtaining relations between the Magic Formula coefficients and tire physical properties
This paper introduces a technique that relates the coefficients of the Magic Formula tire model to the physical properties of the tire. For this purpose, the tire model is developed by ABAQUS commercial software. The output of this model for the lateral tire force is validated by available tire information and then used to identify the tire force properties. The Magic Formula coefficients are o...
متن کاملA new approach for constraining failure probability of a critical deteriorating system Yard crane scheduling in port container terminals using genetic algorithm
In this paper, we focus on a continuously deteriorating critical equipment which its failure cannot be measured by cost criterion. For these types of systems like military systems, nuclear systems, etc it is extremely important to avoid failure during the actual operation of the system. In this paper we propose an approach which constrains failure probability to a pre-specified value. This valu...
متن کامل