Design of a multi-walled carbon nanotube field emitter with micro vacuum gauge
نویسندگان
چکیده
The variation of vacuum level inside a field emission device when electron is emitted from multi-walled carbon nanotubes (MWCNTs) by electric field was measured where MWCNT gauge packaged with a vacuum device was used to measure the degree of a vacuum until the end of the vacuum device life. It was found that the electrical properties of MWCNTs altered with the degree of a vacuum. We fabricated MWCNT gauge which were printed and pasted by the screen printer. In this paper, we report the successful detection of the ionization of gases in vacuum state.
منابع مشابه
Wide-range Vacuum Measurements from MWNT Field Emitters Grown Directly on Stainless Steel Substrates
The field emission properties and the vacuum measurement application are investigated from the multi-walled carbon nanotubes (MWNTs) grown directly on catalytic stainless steel substrates. The MWNT emitters present excellent emission properties after the acid treatment of the substrate. The MWNT gauge is able to work down to the extreme-high vacuum (XHV) range with linear measurement performanc...
متن کاملHigh Current Cold Electron Source Based on Carbon Nanotube Field Emitters and Electron Multiplier Microchannel Plate
In this work, we report the synthesis and field emission properties of carbon nanotube multistage emitter arrays, which were grown on porous silicon by catalytic thermal chemical vapor deposition. The emitter structure consisted of arrays of multiwall nanotubes (MWNTs) on which single/thin-multiwall nanotubes were grown. The structure was confirmed by TEM and Raman analysis. Higher field emissi...
متن کاملELECTROPHORETIC DEPOSITION OF TIO2-MULTI-WALLED CARBON NANOTUBE COMPOSITE COATINGS: MORPHOLOGICAL STUDY
A homogenous TiO2 / multi-walled carbon nanotubes(MWCNTs) composite film were prepared by electrophoretic co-deposition from organic suspension on a stainless steel substrate. In this study, MWCNTs was incorporated to the coating because of their long structure and their capability to be functionalized by different inorganic groups on the surface. FTIR spectroscopy showed the existence of...
متن کاملEffects of Nanotube/Matrix Interface on Multi-Walled Carbon Nanotube Reinforced Polymer Mechanical Properties
In this paper, experimental and Finite Element Methods have been used to determine mechanical properties of nanocomposites. Standard tensile and compression samples with 0.0, 0.15, 0.25, 0.35, 0.45, and 0.55 weight fraction of Multi-Walled Carbon Nanotube (MWCNT) were prepared and tested. Nanotube weight fraction was varied to investigate the effects of nanotube weight fraction on nanocomposite...
متن کاملNovel Biopolymers/Functionalized Multi-Walled Carbon Nanotube Composite Scaffolds for Cardiac Tissue Engineering
Abstract This work introduces the novel gelatin/chitosan blend scaffolds containing different amounts of functionalized multi-walled carbon nanotubes (f-MWCNTs) up to 0.1wt%, which were prepared by freeze drying (freezing and lyophilization). The composite scaffolds were characterized by Fourier transformed infrared spectroscopy (FTIR) to distinguish the functional groups and different bonds in...
متن کامل